Xiaomi Smart Humidifier 2 User Manual page 11

Specifications
Name: Humidifier
Model: MJJSQ05DY
Rated Voltage: 220–240 V~
Rated Power: 28 W
Rated Frequency: 50/60 Hz
Operation Frequency: 2400–2483.5 MHz
Operating Temperature: 5°C to 40°C
Wireless Connectivity: Wi-Fi IEEE 802.11 b/g/n 2.4 GHz, Bluetooth 4.2
Power Consumption
Standby mode: ≤ 0.5 W
Networked standby mode: ≤ 2.0 W
* The humidifying capacity was tested by CVC Testing Technology Co., Ltd. according to the standard GB/T
23332-2018. The tested mist dispensing angle is 180°. Test Report No.: WTS2022-8606.
Under normal use of condition, this equipment should be kept a separation distance of at least 20 cm between the
antenna and the body of the user.
Troubleshooting
Issue
The humidifier cannot turn
on normally.
The humidifier does not
generate wind or mist
when it is working.
The mist volume is too
small.
Note: If you cannot fix the issues with the above solutions, please contact the a er-sales service team.
Possible Cause
The humidifier is not connected to
power.
The water is running out in the
water tank.
Fan error
The vaporizer is damaged.
The air inlet or the mist outlet is
blocked.
10
Humidifying Capacity: 350 mL/h *
Noise: ≤ 38 dB(A)
Net Weight: 1.57 kg
Water Tank Capacity: 4.5 L
Item Dimensions: Φ 190 × 335 mm
Maximum Output Power:
Operating Humidity: 10%–80% RH
Time to Enter the Condition
Standby mode: ≤ 20 min
Networked standby mode: ≤ 20 min
Solution
Check if the humidifier is plugged
in properly.
Add water to the water tank.
Contact the a er-sales service
team.
Clean the air inlet or the mist
outlet.
20 dBm