Heat Storm HS-1500-OTR-MWI User Manual

1500 w carbon fiber infrared heater
Hide thumbs Also See for HS-1500-OTR-MWI:

Advertisement

Quick Links

User
manual
Model: HS-1500-OTR-MWI
1500 W | Carbon fiber infrared heater
V1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HS-1500-OTR-MWI and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Heat Storm HS-1500-OTR-MWI

  • Page 1 User manual Model: HS-1500-OTR-MWI 1500 W | Carbon fiber infrared heater...
  • Page 2: Table Of Contents

    Return policy �������������������������������������������������������������������������������������������������14 1-year limited warranty �������������������������������������������������������������������������������14 Thank you and congratulations on your Heat Storm Heater! Please read and keep all safety and use instructions. Should you have any questions or concerns, please don't hesitate to reach out to us at 435-752-6611 or cs@heatstorm.com.
  • Page 3: Important Instructions

    Important instructions Please read and understand this entire manual before attempting to assemble, operate, or install the product. Use this heater only as described in the manual. Do not operate the heater unless it is attached to the wall, tripod, or ceiling mount. If the directions are not followed, an electric shock or fire may result causing property damage, personal injury or death.
  • Page 4 • Heat Storm Infrared Heaters are considered to be an appliance. Each heater and appliance should be on its own circuit. •...
  • Page 5: Remote Control Battery Replacement

    tripping hazards. • If the supply cord is damaged, it must be replaced by the manufacture, its service agent, or similarly qualified persons in order to avoid a hazard. • Do not use in the following areas: outdoors, closets, or locations with gasoline, paint, or flammable liquids.
  • Page 6: Installation Instructions

    Do not use directly near a bathtub, a shower, a swimming pool POWER CONNECTION GUIDELINES Heat Storm Heaters are classified as appliances. Each heater and appliance should have its own dedicated circuit. This heater is designed for standard 120-volt, 20-amp outlets and should only be connected to a properly grounded outlet.
  • Page 7: Grounding Instructions

    device that automatically turns it on while unattended (e.g., Alexa or Google programmed plug). Ensure the cord is not concealed under carpeting, rugs, runners, or similar coverings. Avoid routing it under furniture or appliances and position it away from high-traffic areas to prevent tripping hazards. Regularly inspect your heater cord and plug connections.
  • Page 8: Included Parts

    INCLUDED PARTS Missing parts or hardware? Email us at cs@heatstorm.com Heater Wall bracket Remote qty: 1 qty: 1 qty: 1 M4x10 screw Wall anchor Self tapping screw Cable clip qty: 4 qty: 2 qty: 2 qty: 4 WALL MOUNT • Only use provided brackets.
  • Page 9 Attach the heater bracket to the back of the heater. Wall bracket qty: 1 M4x10 screw qty: 4 Drill your pilot holes and insert the ribbed plastic anchors before using the screws to mount the heater. Self tapping screw qty: 2 Wall anchor qty: 2 Prevent the power cable from touching...
  • Page 10: Operations & Controls

    Operations & Controls Turn heater on/off Press the power button to alternate between on and standby. Eco mode While the heater is on, press and hold the power button for about 2 seconds to turn the ECO setting on or off. When active, a green leaf icon will appear, and the heater will automatically turn off if it hasn't detected a person within 10 feet for 5 minutes.
  • Page 11: Wi-Fi Setup

    Wi-Fi® setup SMART LIFE APP Manage your Heat Storm Smart Heater conveniently anytime and anywhere you desire. With just a tap of your finger, you can adjust temperatures, create schedules, set a child lock, and ensure warmth according to your preferences.
  • Page 12: Easy Connect

    EASY CONNECT *Ensure your phone's Wi-Fi, Bluetooth®, and location functions are all activated. Add device When the machine is on, press and hold the power button on the control panel for 5 seconds until the Wi-Fi indicator light begins flashing slowly. Add the appliance in the app: If a pop-up is displayed, tap "Go to add".
  • Page 13: Maintenance

    HEATER MALFUNCTION OR DAMAGE DO NOT operate if the following occurs: • Heater has a damaged cord or plug. • After the heater malfunctions. • Heater has been dropped or damaged in any manner. Turn off the heater, disconnect the cord or turn off the circuit at the breaker, and have heater inspected by an electrician or authorized service facility before reusing.
  • Page 14: Return Policy

    Returns & exchanges 30 DAY RETURN POLICY Heaters purchased directly from EnergyWise Solutions can receive a refund of the total sales amount if the following conditions are met within 30 days: 1. Product is in new condition. 2. Product is packed in the original manufacturers box and packing material.
  • Page 15 WARRANTY REDEMPTION Reach out to Heat Storm customer service at 435-752-6611 during the warranty period. Please have your sales receipt, purchase location, and product model information ready. Troubleshooting support will be offered over the phone.
  • Page 16 Need help? 435-752-6611 cs@heatstorm.com heatstorm.com...

Table of Contents