Page 5
3. Then place screws into wood studs into the wall as shown below Heater is prewired for an outlet and cord can be cut for direct wire application DISCLAIMER - Recommened professional installation by a certified electrician...
Page 7
SELECTING CELSIUS AND FAHRENHEIT By pressing the"+" and"-" icons at the same time, you can set the heater to function and display in Celsius or Fahrenheit. NOTE: Switching between Celsius and Fahrenheit can only be Color Status icon What you do What heater will do performed using touch screen on heater, and is not available single touch...
NOTE: Typically Heat Storm Infrared Heater thermostats are more accurate than home central thermostats. Changing your Heat Storm Infrared Heater to match your central system may reduce its efficiency. NOTE: You may have to attempt thermostat calibration several times to make your heater thermostat match your HVAC system.
Page 10
Check for desired temperature. You can watch video tutorials at heatstorm.com, or scan below...
Page 11
Why does the Blower Fan keep running after I have turned off the unit? The Blower Fan will continue to run until the heat chamber has cooled down. After a few minutes the fan will shut off automati- cally. This ensures that the heating elements are cooled properly increasing the longevity of your heater.
Page 12
Yes, if the basement is finished with drywall insulation and carpet. when plugged in. Other¬wise, we recommend you use our Heat Storm Outdoor -If the heater didn’t finished it cool down procedure when it was Infrared Heaters for this heating need. For more information visit unplugged, the fan will blow immediately when the heater is turned heatstorm.com or contact customer service at 435-752-6611...
Need help?
Do you have a question about the HS-1500-WALL-R and is the answer not in the manual?
Questions and answers