Neem voor meer informatie over het recyclen van dit product contact op met uw lokale gemeente, uw afvalverwerkingsbedrijf of de winkel waar u het product heeft gekocht. KH62-3INOX/KH92-3INOX Versie NL 07/2020 Pagina 1 van 10...
Page 3
Bovenste schouwdeel (optioneel) Verloopstuk (optioneel) Koolfilter (optioneel) Hoev. Documentatie Gebruiksaanwijzing Hoev . Installatieonderdelen Ref. Schroef 5 x 50 Wandp luggen Schroeven 4,2 x 9,5 / Schroeven 4 x 8 Bevestigingsbeugel schouwdeel (optioneel) KH62-3INOX/KH92-3INOX Versie NL 07/2020 Pagina 2 van 10...
Page 4
AFMETINGEN unit:mm 598/898 Min. Min. 650mm 650mm Optie Schouw 400+0 400+300 569 610-850 400+390 569 610-940 500+490 669 710-1140 KH62-3INOX/KH92-3INOX Versie NL 07/2020 Pagina 3 van 10...
Page 5
Teken een punt (3) op de horizontale lijn C, op 155 mm van de verticale referentielijn. Herhaal dit aan de andere kant en controleer of de punten goed waterpas zijn. KH62-3INOX/KH92-3INOX Versie NL 07/2020 Pagina 4 van 10...
Page 6
Als u een luchtuitlaat aansluiting van ɸ 120 mm installeert, plaatst u het verloopstuk (3) op de uitlaat van de afzuigkap. Bevestig de buis 4 op zijn plaats m et voldoende buisklemmen (niet mee geleverd). Verwijder de eventuele koolstoffilters. KH62-3INOX/KH92-3INOX Versie NL 07/2020 Pagina 5 van 10...
Page 7
Druk op deze knop en de ventilator draait op GEMIDDELDE snelheid. Druk op deze knop en de ventilator draait op HOGE snelheid. Druk op deze knop om de verlichting AAN - of UIT te schakelen. KH62-3INOX/KH92-3INOX Versie NL 07/2020 Pagina 6 van 10...
Page 8
Haal d e metalen vet filters eruit (en reinig indien nodig) Verwijder de dichtgeslibde actieve koolstof filter s Plaats d e nieuwe koolstof filters Plaats d e (evt. gereinigde) metalen filters terug . KH62-3INOX/KH92-3INOX Versie NL 07/2020 Pagina 7 van 10...
Page 9
Steek de stekker terug in het stopcontact en/of schakel de zekering terug in. Spanning Lamp kap ILCOS D Code Afbeelding vermogen LED module afmetingen: DBS-1.5- 1.5W 220-240V H-33.2/120 33.2mm x 120mm KH62-3INOX/KH92-3INOX Versie NL 07/2020 Pagina 8 van 10...
Het doorgestreepte prullenbaksymbool op de producten herinnert u aan uw inzamelverplichtingen. De consument kan contact opnemen met de lokale autoriteiten of zijn detailhandelaar voor informatie over het correct recyclen van diens oude en/of defecte toestellen. KH62-3INOX/KH92-3INOX Versie NL 07/2020 Pagina 9 van 10...
Page 11
KH62-3INOX/KH92-3INOX Versie NL 07/2020 Pagina 10 van 10...
RECOMMENDATIONS AND SUGGESTIONS The instructions for Use apply to several versions of this appliance. Accordingly, you may find descriptions of individual features that do not apply to your specific appliance. INSTALLATION The manufacturer will not be held liable for any damages resulting from incorrect or improper installation.
INSTALLATION WALL DRILLING AND BRACKET FIXING Option Chimney 400+0 400+300 410-650 400+390 410-740 500 490 510-940 Vertical reference line As a first step, proceed with the following drawings: A vertical line up to the ceiling or up to the upper limit, at the center of the area in which the hood is to be fitted.
Fix the brackets (Optional): Drill holes at the marked points with a ɸ10 mm drill bit. Insert the Wall Plugs 11 into the holes. Screw 2 screws 10 (5 x 50) to Wall Plugs 11 at the horizontal line A; approximately the four fifth ...
CHIMNEY ASSEMBLY The chimney can only be installed with exhausting hood. Lower Decorative Chimney Fix the Lower Decorative Chimney to the hood body with 2 screws 12 (4.2 x 9.5) supplied with the hood. Upper Decorative Chimney Fix the upper chimney onto the bracket 21 with 2 screws 12 (4.2 x 9.5) supplied with the hood. ...
MAINTENANCE GREASE FILTERS CLEANING METAL SELF-SUPPORTING GREASE FILTERS The filters must be cleaned every 2 months of operation, or more frequently for particularly heavy usage, and can be washed in a dishwasher. Remove the filters one by one pushing them towards the back side of the hood unit and simultaneously pulling downwards.
LIGHTING LIGHT REPLACEMENT For rectangular LED : Remove the grease filter. Remove the light by levering its fitting from the hood body (this may require pressure or force to be applied). Disconnect the connector of the light. Replace the light with a new one of the same type,making sure that you connect the light with the ...
TROUBLE SHOOTING Fault Cause Solution The blades are blocked. Check the blades. The capacitor is damaged. Replace capacitor. Light on, but The motor is damaged. Replace motor. motor does not The internal wiring of motor is cut off/ work Replace motor. disconnected.
Need help?
Do you have a question about the KH62-3INOX and is the answer not in the manual?
Questions and answers