Advertisement
Know your Breville Café modena
espresso/Cappuccino machine
Power 'ON/OFF' switch
'POWER' light (red)
illuminates when the
machine is turned on
15 bar Italian designed & made pump system
Thermoblock heating system
Selector control
for Espresso and Steam
Brew head
Filter holder
2 stainless steel filters
(1 cup filter and 2 cup filter)
Removable drip tray
Combined measuring spoon
and grid
and coffee press
6
BES230_CAFE MODENA_FA.indd 6-7
Cup warming plate
Removable 1.2 litre water tank
'HEATING' light (orange)
illuminates to indicate that
the machine is heating and
will turn off when the correct
temperature has been reached.
This light will cycle on and off
during operation to indicate the
machine is monitoring the correct
temperature
External water window
Swivel steam wand
with froth enhancer
Steam baffle
Water level indicator
operating your Breville Café modena
espresso/Cappuccino machine
Before first use
•
Remove and safely discard any packaging material
or promotional labels before using your Breville
Café Modena Espresso/Cappuccino Machine for the
first time.
•
It is recommended to wash the frothing jug,
measuring spoon, filter holder and the stainless
steel filters in mild detergent and water. Rinse and
dry thoroughly.
•
Wipe the outer housing with a soft, damp cloth and
dry thoroughly. Do not immerse the outer housing,
power cord or power plug in water or any other
liquid.
Do not clean any of the parts or accessories
in the dishwasher.
Note
filling the water tank
•
Ensure that the Power 'ON/OFF' switch is in the
'OFF' position and the Selector Control is in the
'STANDBy' position.
•
Switch the machine off at the power outlet and
unplug the power cord.
•
Open the water tank lid and remove the water tank.
Fill the water tank with cold water to the maximum
mark and replace back into the machine, pressing
down firmly so that the water valve opens. Close
the water tank lid.
The water tank should be filled with fresh
cold water before use.
Check water level before use and replace
the water daily.
Do not used mineral or distilled water.
Note
pre-heating the machine
For optimal crema, it is recommended to carry out a
complete brewing operation with water but without
any ground coffee in the filter holder before making
your first coffee to ensure that the machine has
been pre-heated.
•
Ensure the Selector Control is in the 'STANDBy'
position.
•
Insert the power plug into a 230/240V outlet and
switch on. Press the Power 'ON/OFF' switch to
'ON'.
•
When the orange 'HEATING' light goes off, turn the
Selector Control to the
'ESPRESSO' position
and allow a small amount of water to run through
the brew head for a few seconds without the filter
holder in place.
Crema is the finely-aerated, golden,
aromatic layer, extracted from the ground
coffee during brewing, that settles on top of
the brewed coffee.
Note
pre-warming cups
For optimal coffee temperature, pre-warm cups by
placing them on the cup warming plate.
10/6/08 3:04:12 PM
7
Hide quick links:
Advertisement
