cord suitable for outdoor use reduces the risk of electric IMPORTANT! shock. It is essential that you read the instructions in this manual ■ If operating a power tool in a damp location is before assembling, operating, and maintaining the unavoidable, use a residual current device (RCD) product.
■ Maintain power tools and accessories. Check for BLOWER SAFETY WARNINGS misalignment or binding of moving parts, breakage ■ Do not use the machine in bad weather conditions, of parts and any other condition that may affect the especially when there is a risk of lightning. This power tool’s operation.
■ Always be sure of your footing on slopes. Walk; never ■ Do not store or transport the product with the battery run. pack fitted. Remove the battery pack, and secure it separately. ■ Keep proper footing and balance. Do not overreach. Overreaching can result in loss of balance.
Wear eye and ear protection. Wear appropriate respiratory mask. Do not expose the product to rain or damp conditions. Rotating fans. Keep hands and feet out of openings while the product is running. Keep all bystanders, especially children and pets, a safe distance away from the operating area.
Page 6
R36BLW50 On/Off trigger Handle Battery port Latch Air outlet Blower tube Operator's manual Battery pack Charger Know your product...
Page 7
Wear full eye and ear protection, Slide the blower tube over the air outlet until the latch clicks into place. appropriate respiratory mask, substantial footwear, and long trousers at all times while operating the product. Do not operate the product when barefoot or wearing open sandals.
Page 8
Cleaning the Operating the p.10 product product Storing the product p.11...
OPERATING THE PRODUCT WARNING! Do not use the product without the blower tube securely attached. 1. Install the battery pack into the battery port until the latch clicks into place. 2. Squeeze the on/off trigger to power on the product. NOTE: Operate the product in the recommended position as shown.
CLEANING THE PRODUCT 1. Press the battery latch, and remove the battery pack. 2. Clean the product using a soft, dry brush. WARNING! Do not use water to clean the product. Maintenance...
STORING THE PRODUCT 1. Press the battery latch, and remove the battery pack. 2. Press the latch button, and remove the blower tube. 3. Store the product in a cool, dry, and well-ventilated place that is inaccessible to children. Keep the product away from corrosive agents, such as garden chemicals and de-icing salts.
Organisations have legal responsibilities to Cordless blower protect the health of their workers. Techtronic Industries Model R36BLW50 Australia Pty Ltd, (ACN 002 277 509) (TECHTRONIC) considers the safety of all users of our products to be of Rated voltage 36 V d.c.
Page 16
Techtronic Industries Australia Pty Ltd 31 Gilby Road, Mount Waverley, VIC 3149 Melbourne, Australia Techtronic Industries N.Z. Limited Unit C, 70 Business Parade South, Highbrook, Auckland 2013, New Zealand RYOBI is a trade mark of Ryobi Limited, and is used under license. 961087720-01...
Need help?
Do you have a question about the R36BLW50 and is the answer not in the manual?
Questions and answers