Advertisement
Available languages
Available languages
Advertisement
Table of Contents
Related Manuals for Ronix RH-4940
Summary of Contents for Ronix RH-4940
- Page 1 2 TONNEN WAGENHEBER STAND RH - 4940 www.ronixtools.com...
-
Page 3: Technische Daten
TECHNISCHE DATEN RH-4940 Modell Tragkapazität 2TON Material Gusseisen/ stahl Verriegelungstyp Verriegelungskralle Minimale Höhe 275mm Maximale Höhe 420mm Standards ASME Gewicht 4.8Kg GERÄTEKOMPONENTEN Ratschenstange Verriegelungskralle Griffhülse Verriegelungsgriff Basisrahmen Bedienungsanleitung... - Page 4 SICHERHEITSANWEISUNGEN 1- Lesen Sie alle Anweisungen, bevor Sie dieses Gerät verwenden, und befolgen Sie sie. 2- Überschreiten Sie nicht die Nennkapazität. 3- Verwenden Sie das Gerät nur auf harten, ebenen Oberflächen mit weniger als 3 Grad Neigung. 4- Zentrieren Sie die Last auf dem Sattel. 5- Verwenden Sie immer ein Paar zusammenpassender Stützen.
- Page 6 2TON JACK STAND RH - 4940...
-
Page 7: Technical Specifications
TECHNICAL SPECIFICATIONS RH-4940 Model Capacity 2TON Material Cast iron/steel Lock Type Locking Pawl Min. Height 275mm Max. Height 420mm Standards ASME Weight 4.8Kg PART LIST Ratchet Bar Locking Pawl Handle Sleeve Locking Handle Base Frame User Manual... -
Page 8: Safety Instructions
SAFETY INSTRUCTIONS 1- Study, understand, and follow all instructions before operating this device. 2- Do not exceed rated capacity. 3- Use only on hard, level surfaces, with less than 3 degrees of slope. 4- Center load on saddle. 5- Use as a matched pair only. 6- Stands are not to be used to simultaneously support both ends of a vehicle. - Page 9 2- Place load on the center of saddle for safety it is strongly recommended that lifting means not be removed while jack stands are supporting the vehicle. 3- Secure ratchet by turning stopper to hold load. Make sure stopper has been securely inserted. Release stopper and let ratchet glide down to the lowest position when storing the jack stand.
- Page 10 Visual inspection shall be performed before each use of the stand by checking abnormal condition, such as cracked welds, leaks and damaged, loose, or, missing parts if srand is believed to have been subjected to abnormal load or shock inspection shall be made by authorized repair facility.
- Page 12 www.ronixtools.com...
Need help?
Do you have a question about the RH-4940 and is the answer not in the manual?
Questions and answers