Barska AX12432 User Manual

User Manual
Keypad Portable Safe
Read all instructions before using this safe.
WARNING
- For security purposes, change the factory default code as
soon as possible. Factory default code is 1234.
- Avoid leaving door open and unattended; it will allow
unauthorized individuals to reprogram the safe, gaining
full access to the safe and contents.
- Store emergency keys in a secure place; NOT inside of
the safe.
- Keep area in front of safe door clear; safe door is spring
loaded and will pop open forward, be careful when
opening safe.
- Keep safe away from children.
NOTE: BARSKA is not responsible for any damages due to
moisture.
NOTE: BARSKA is not responsible if the safe or its contents
gets lost or stolen.
PARTS OF THE SAFE
B
A
D E
F
A. Key Access D. Initialization Button
B. Indicator Lights E. Battery Compartment
C. Key Pad F. Removable Shelf
©2024 BARSKA® | Pomona, CA 91767 | www.barska.com
OPENING THE SAFE WITH ACCESS KEY
1. Insert access key in key access, and turn
counter-clockwise to open.
NOTE: Be careful when opening the safe; keep area in
front of safe door clear.
2. Remove access key.
NOTE: Store keys in a secure place. NOT inside of
the safe.
BATTERIES
1. Remove battery cover located on the inside of the safe
under the key pad. (E)
2. Insert 4 new Alkaline AA batteries
into the battery compartment and
pay attention to the polarity of
the batteries.
3. Replace battery cover.
NOTE: Do not mix old and new
batteries.
CREATING PERSONAL PIN CODE
Safe retains one 3-8 digit pin code.
1. With safe open, press and hold the initialization button
(D) located on the inside of the safe under the keypad
for 3 seconds. The green indicator light will flash twice.
C
2. On the keypad input your 3 – 8 digit pin code (press
the initialization button when finished if pin code is not
8 digits). The yellow indicator light will flash twice and
2 beeps will be heard. Re-enter your pin code (press
the initialization button when finished if pin code is not
8 digits).
Successful
Green Flash will be seen along with 2 beeps.
Unsuccessful
Red flash will be seen along with several beeps.
Lock out mode is activated when the wrong personal
pin code is entered 3 consecutive times. The alarm will
be triggered and will last 1 minute. Lock out mode will
last 2 minutes. During this period, pressing any button
is invalid.
3/24
BC694
TESTING PERSONAL PIN CODE
1. Enter in personal pin code on key pad. Door will
automatically unlock and open.
NOTE: Be careful when opening the safe; keep area in
front of safe door clear.
2. Test a pin code that is not registered to make sure the
safe does not open to complete testing process.
OPENING & CLOSING SAFE WITH PERSONAL
PIN CODE
OPEN:
To open safe, on the key pad enter in personal pin code.
Door will automatically unlock and open.
NOTE: Be careful when opening the safe; keep area in
front of safe door clear.
CLOSE:
To close safe, close door and the door will automatically
lock in place.
LOCK OUT
Lock out mode is activated when the wrong personal pin
code is entered 3 consecutive times. The alarm will be
triggered and will last 1 minute. Lock out mode will last 2
minutes. During this period, pressing any button
is invalid.
CHANGING PERSONAL PIN CODE
Follow steps in "CREATING PERSONAL PIN CODE".
SOUND
Press and hold the #1 button until all the indicator lights
flash to turn the sound either on or off.
See reverse side for more information