Page 1
RMC-2150 Multi-Player Mixer-Amp 2 x 150W Item ref: 953.300UK User Manual Version 1.0 Caution: Please read this manual carefully before operating Damage caused by misuse is not covered by the warranty...
Page 2
Introduction Thank you for choosing the Adastra RMC-2150 multi-player Mixer-amplifier as part of your sound system. This stereo amplifier offers high quality playback of digital audio media, DAB+ and FM radio stations. Please read this manual to gain the best results from your product and avoid damage through misuse.
A further stereo line level source may be connected to the AUX input via L+R RCA sockets (27) Loudspeakers should be connected to the RMC-2150 via Speakon leads to the Left and Right outputs (23). These are wired inside each connector to the 1+ and 1- terminals. Important: Ensure that the load is no lower than 4Ω...
Page 5
Player section: Settings When in standby mode (clock face), pressing the INFO/MENU button (6) will enter the main settings Menu. Press the encoder (9) to enter a setting and rotate to adjust. Press again to confirm or Info/Menu to go back. Backlight Timeout adjusts time to dim backlight.
To pair a new device, press the Source button (11) to initiate pairing on the RMC-2150. Open the Bluetooth menu on a smart phone or other sending device and search for the device called “Adastra RMC-2150” and select to pair. Once paired, the display will state “Connected” or “Playing” and show the name of the connected device.
CD Playback The RMC-2150 has a mode for playing standard audio CDs (playback of other disc formats is not supported) To play a CD, use the source select procedure to enter CD mode. If you are unsure if a disc is already loaded, press the eject button (10), which will push any CD that is already loaded back out of the CD slot (3).
Need help?
Do you have a question about the adastra RMC-2150 and is the answer not in the manual?
Questions and answers