Subscribe to Our Youtube Channel
Related Manuals for Avsl Adastra RS Series
Summary of Contents for Avsl Adastra RS Series
- Page 1 RS SERIES Rackmount 100V slave amplifiers Item ref: 953.201UK: RS121 953.202UK: RS241 953.203UK: RS360 953.204UK: RS480 User Manual Version 1.1 Caution: Please read this manual carefully before operating Damage caused by misuse is not covered by the warranty...
- Page 2 Introduction Thank you for choosing the Adastra RS-series rackmount 100V slave amplifier as part of your public address system. This amplifier is designed to offer high quality, dependable service for mobile and installed systems. Please read this manual fully and follow the instructions to achieve the best results with your new purchase and to avoid damage through misuse.
- Page 3 Connection and setup Set the power switch (3) to the “off” position and connect the rear IEC inlet (4) to the mains using the supplied mains lead (or an equivalent approved type). Check that the supply voltage is 170-264Vac 50Hz. A pair of screw terminals is provided on the right side of the rear panel for connection to an alarm system if required (14).
- Page 4 The goods must be disposed of according to your local council guidelines. Errors and omissions excepted. Copyright© 2024. AVSL Group Ltd. Unit 2-4 Bridgewater Park, Taylor Rd. Manchester. M41 7JQ AVSL (EUROPE) Ltd, Unit 3D North Point House, North Point Business Park, New Mallow Road, Cork, Ireland. RS Series User Manual...
Need help?
Do you have a question about the Adastra RS Series and is the answer not in the manual?
Questions and answers