Clean The Drainage Pump - PITSOS WFPI600D Instructions For Installation And Use Manual

Clean the drainage
pump
Emptying the wash water
If the wash water is not completely emptied. Foreign
objects are blocking the drainage pump or laundry
with a lot of loose threads has been washed.
(up to 20 litres, a suitable container is needed)
d Danger of scalding
First allow the wash water to cool.
Keep children and pets away from the appliance.
q Set the programme selector to the stop position.
q Open and pull out the service hatch.
q Take the drainage pipe out of its housing and re
move it from the appliance.
90 C
q Remove the lid carefully and let the wash water
.
max
flow into the receptacle.
q Fit closure plug and attach the drainage pipe to its
fitting.
q Carefully unscrew the pump's cap.
A little residual water may leak out.
q Remove foreign objects/loose threads from inside
and clean it. It should be possible to turn the drai
nage pump rotor. Remove remains and loose
threads from the
thread of the pump cap
and pump housing.
q Screw the pump lid back on.
q Put the service door back in place.
To avoid detergent being discharged in the next wash
without having been used:
q Put 1 litre of water into the drum II.
q Select programme Üíéëçóç.
25