General safety guidelines and warnings Points to bear in mind when washing clothes: Points to bear in mind before operating the appliance: Points to note for the protection of the appliance: Points to note when transporting the machine: Removal and disposal of packaging ó...
Environmental protection / Saving energy m The most economic and least aggressive use sible into the machine according to the se from an environmental point of view is always lected programme. to load the maximum amount of laundry pos Installing the appliance When installing the appliance and connect If necessary, fix the appliance to the floor us ing it to the water supply and mains, the...
Water drainage (pic. 4) When setting up and connecting the ap If draining through a sink, make sure the dis pliance to the water outlet supply, make sure charge pipe cannot be moved from its loca the pipe is not bent or twisted. Do not pull the tion.
Getting to know your new appliance 1. Protective plate (cover) 2. Drawer for detergent and additives 3. Control panel 4. Rating plate 5. Door 6. Lever for opening the door 7. Drainage pump 8. Adjustable front feet to level the appliance 9.
Programme selector ÅõðáèÞ Selecting programmes using the programme « » selector. For this, the control knob needs to be Very delicate clothing, 30ºC: cotton, synthetic turned and the mark positioned on the pro or mixed materials, curtains. Does not spin gramme selected.
First washing cycle Carry out the first washing cycle without any m Set programme selector ÁíèåêôéêÜ 90ºC laundry in the machine to remove residual wa « ». The «M » indicator ter left inside the drum as a result of testing of light flashes.
Page 10
Loading the laundry (pic. 5) Open the door Close the door m Pull the lever. Make sure there are no items left trapped be tween the door and the rubber seal. Put the laundry in the washing machine m Close the door by pressing it against the Garments previously treated with detergents frame of the appliance, until you can hear the containing solvents, such as stain removers...
End of the wash programme/Removing the laundry The «B » indicator light flashes. Taking the laundry out of the machine stop m Turn the programme selector to « ». m Turn off the tap. ðáñáìïíÞ If « » has been selected: m Open the door.
Page 12
Cleaning / Maintenance / Frost protection (pic. 6, 7, 8, 9) Before performing any type of mainte Cleaning the drainage pump nance work on the appliance, it must be disconnected from the mains and the tap turned off. External cleaning of the appliance Procedure stop Risk of burning!
Cleaning the filters in the water inlet Frost protection Drain the water from the pump: Cleaning the drainage pump Drain the water from the inlet pipe: Procedure óôýøéìï Üíôëçóç óôýøéìï Üíôëçóç Ýíáñîç » stop Technical data...
Minor faults with simple solutions Malfunction Possible cause / Remedy The function indicator does not come Electrical power failure Cleaning the drainage pump The wash cycle does not start Ýíáñîç K» «M Water is not visible in the drum Washing result is unsatisfactory Foamcomes out of the detergent dra Foam is visible after the final rinse Strange motor noises...
After Sales Service (E-Nr) (FD) Minor faults with simple solutions E-Nr. Product nr. Serial nr. Consumption figures Consumption ** Programme Programme Size of load Size of load Energy Water Duration ÁíèåêôéêÜ 40 ºC 6.00 kg* 0.85 kWh 58 l 110 min ÁíèåêôéêÜ...
Need help?
Do you have a question about the WFP1000B6 and is the answer not in the manual?
Questions and answers