Advertisement
Quick Links
Advertisement
Related Manuals for HPE Aruba Networking 7024 Controller
Summary of Contents for HPE Aruba Networking 7024 Controller
- Page 1 HPE Aruba Networking 7024 Controller...
- Page 2 Hewlett Packard Enterprise Company. To obtain such source code, please check if the code is available in the HPE Software Center at https://myenterpriselicense.hpe.com/cwp-ui/software but, if not, send a written request for specific software version and product for which you want the open source code.
- Page 3 Power, Status, and Peered LEDs LCD Panel LCD Mode Menu Disabling the LCD Screen USB Interface Serial Console Port Serial Console Port Adaptor Micro-USB Console Port Micro-USB Driver Power Supply Grounding Point HPE Aruba Networking 7024 Controller | Installation Guide Contents |...
- Page 4 Connecting and Disconnecting the AC Power Cord Installing an SFP/SFP+ Module Removing an SFP/SFP+ Module Specifications, Safety, and Compliance 7024 Specifications Safety and Regulatory Compliance Electromagnetic Interference Proper Disposal of HPE Aruba Networking Equipment | Contents HPE Aruba Networking 7024 Controller | Installation Guide...
- Page 5 Preface This document describes the hardware features of the HPE Aruba Networking 7024 Controller. It provides a detailed overview of the physical and performance characteristics of the controller and explains how to install the controller and its accessories. Guide Overview...
- Page 7 M6 x 15 mm Phillips Pan Head Screws M4 x 8 mm Phillips Flat Head Screws M6 x 7 mm Grounding Screws AC Power Cord Retaining Clip Power Cable Micro-USB Cable Rubber Feet HPE Aruba Networking 7024 Controller | Installation Guide 7024 Controller |...
- Page 8 Installation Guide (this document, printed) Quick Start Guide (printed) End User License Agreement (printed) Optional accessories are available for use with the 7024 controller and are sold separately. Contact your HPE Aruba Networking sales representative for details and assistance. 7024 Components This section introduces the component and its location in the 7024 controller.
- Page 9 STATUS— Placed on the right side of the port, this LED displays the status of the port. The information displayed by this LED changes based on the LCD mode. The LED behavior corresponding to each LCD mode is listed in Table HPE Aruba Networking 7024 Controller | Installation Guide 7024 Controller |...
- Page 10 SFP/SFP+. See Figure HPE Aruba Networking tests and supports HPE Aruba Networking optics within their controller systems. Third party optics are not tested or supported; therefore, HPE Aruba Networking does not guarantee proper functionality of third party optics when used in an HPE Aruba Networking system.
- Page 11 For the list of HPE Aruba Networking approved DAC cables and SFP/SFP+ modules for controllers, see Table 7 Table Other non-approved third-party optics or DAC cables are not tested or supported by HPE Aruba Networking on controllers; therefore, HPE Aruba Networking does not guarantee their proper functionality when used with HPE Aruba Networking controllers.
- Page 12 The management port has a LINK/ACT LED on its left side and SPEED LED on its right side. During operation, these LEDs provide status information as shown in the following table: | 7024 Controller HPE Aruba Networking 7024 Controller | Installation Guide...
- Page 13 Menu: Allows navigation through the menus of the LCD panel Enter: Confirms and executes the action currently displayed on the LCD panel LCD Mode Menu The LCD menu includes four modes as shown in the following table. HPE Aruba Networking 7024 Controller | Installation Guide 7024 Controller |...
- Page 14 Additionally, it is possible to disable only the maintenance menu. This allows to change the LED behavior and view the device status but prevent upgrades and configuration changes. To disable the LCD screen, enter the Enable mode and use the following CLI commands: (host) #configure terminal | 7024 Controller HPE Aruba Networking 7024 Controller | Installation Guide...
- Page 15 Le port CONSOLE est compatible uniquement avec les périphériques RS-232. Les périphériques qui ne sont pas de type RS-232, notamment les points d’accès, ne sont pas pris en charge. TTENT ION HPE Aruba Networking 7024 Controller | Installation Guide 7024 Controller |...
- Page 16 Micro-USB connection takes precedence over the RJ-45 Console connection. Micro-USB Driver To use the Micro-USB console port, install the HPE Aruba Networking Micro-USB driver on the system that will manage the controller. To download the driver, perform the following steps: 1.
- Page 17 Only use the included or HPE Aruba Networking specified cables, power cords, AC power supplies, and batteries. The power cord should not be used with other electric equipment than what is specified by HPE Aruba Networking. Utilisez uniquement les câbles, cordons d’alimentation, alimentations c.a. et batteries inclus ou les câbles, cordons d’alimentation, alimentations c.a.
- Page 18 To install a 7024 controller from the front in a standard two-post 19-inch Telco rack: 1. Place the mounting brackets over the mounting holes on either side of the controller towards the front (see Figure | Installation HPE Aruba Networking 7024 Controller | Installation Guide...
- Page 19 Each 7024 controller must have its own mounting equipment. Do not place other networking equipment directly on top of a mounted 7024 controller. Failure to do so can damage the controller. HPE Aruba Networking 7024 Controller | Installation Guide Installation |...
- Page 20 2. Secure the brackets to the controller using the eight screws for mounting bracket (four per bracket) and a suitable screwdriver. 3. Mount the controller in the rack using the four screws for system rack mount (two per bracket) and suitable screwdriver (see Figure 10). | Installation HPE Aruba Networking 7024 Controller | Installation Guide...
- Page 21 1. Attach the rubber feet to the bottom of the controller (see Figure 11). 2. Place the controller on the desired flat table or shelf. Figure 11 Attaching Rubber Feet HPE Aruba Networking 7024 Controller | Installation Guide Installation |...
- Page 22 3. Drill the holes and insert wall anchors if the installation requires them. 4. Align the holes of the mounting bracket with the holes drilled in the wall (see Figure 13). 5. Use appropriate screws to secure the controller. | Installation HPE Aruba Networking 7024 Controller | Installation Guide...
- Page 23 2. Insert the coupler end of the AC power cord into the AC power connector. 3. Lower the power cord retaining clip over the AC power cord. The 7024 controller should now be receiving power. HPE Aruba Networking 7024 Controller | Installation Guide Installation |...
- Page 24 2. Insert the fiber optic cable into the SFP/SFP+ module. Ensure that the latch on the cable faces the top of the SFP/SFP+ module (see Figure 15). 3. Slide the cable into place until a connection is made and an audible click is heard. | Installation HPE Aruba Networking 7024 Controller | Installation Guide...
- Page 25 To disconnect an LC fiber optic cable from an SFP-SX or SFP-LX module, depress the transceiver handle to release the latch on the cable and simultaneously pull the cable out of the port. HPE Aruba Networking 7024 Controller | Installation Guide Installation |...
- Page 27 The HPE Aruba Networking controllers must be installed by a professional installer. The professional installer is responsible for ensuring that grounding is available and it meets applicable local and national electrical codes.
- Page 28 This product complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. | Specifications, Safety, and Compliance HPE Aruba Networking 7024 Controller | Installation Guide...
- Page 29 7024 controller device models are in compliance with the essential requirements and other relevant provisions of Directive (2004/108/EC) – CE. The Declaration of Conformity made under Directive 1999/5/EC is available for viewing in the EU community. HPE Aruba Networking 7024 Controller | Installation Guide Specifications, Safety, and Compliance |...
- Page 30 Proper Disposal of HPE Aruba Networking Equipment Waste of Electrical and Electronic Equipment HPE Aruba Networking products at end of life are subject to separate collection and treatment in the EU Member States, Norway, and Switzerland and therefore are marked with the symbol shown at the left (crossed-out wheelie bin).
- Page 31 China RoHS HPE Aruba Networking products also comply with China environmental declaration requirements and are labeled with the “EFUP 50” label shown at the left. HPE Aruba Networking 7024 Controller | Installation Guide Specifications, Safety, and Compliance |...
- Page 32 | Specifications, Safety, and Compliance HPE Aruba Networking 7024 Controller | Installation Guide...
- Page 33 HPE Aruba Networking 7024 Controller | Installation Guide Specifications, Safety, and Compliance |...
- Page 34 | Specifications, Safety, and Compliance HPE Aruba Networking 7024 Controller | Installation Guide...
- Page 35 HPE Aruba Networking 7024 Controller | Installation Guide Specifications, Safety, and Compliance |...
Need help?
Do you have a question about the Aruba Networking 7024 Controller and is the answer not in the manual?
Questions and answers