NAIM NAC 112 - ISSUE 2 Manual page 27

Narcom 3 Handset
centre as it reaches the mid point. Balance
centring is indicated by a flashing volume
control indicator. To resume adjustment once
the balance has centred, bal key must be
released and re-pressed.
mon Enables the output of appropriately equipped
tape machines to be heard while recording.
The source to be recorded is chosen by the
input selection buttons in the normal way. A
second operation of the mon key restores
normal operation.
Alternatively operates the
appropriately equipped preamplifiers.
Compact Disc
prev Selects the previous track or index point.
next Selects the next track or index point.
stop Stops cd play.
play Begins cd play.
<< & >> Fast reverses and fast forwards the cd.
repeat repeats the cd or programmed tracks.
pause Pauses the cd.
Tuner
mode Switches the tuner sequentially through
manual, scan
indicated by the scan and preset indicators on
the tuner display.
up & down These keys both have three possible functions
depending upon the selection of the mode key.
In
the tuning frequency in 0.1MHz steps. In
mode the up and down keys will make the
tuner search for stations. In
up and down keys will tune to the next
numbered preset.
mono Toggles between mono and stereo operation.
The tuner display will indicate stereo when
both stereo operation is selected and a stereo
signal is received. The mono button on the
tuner will illuminate when mono is selected.
17.4 soft keys
These keys operate functions depending on the System
Component Key setting.
numeric keypad:
switch between the preamplifier inputs. In cd mode the
numeric keys will select tracks. In tuner mode the
26
mono
and preset modes. Modes are
manual mode the up and down keys adjust
preset
In preamp mode the numeric
keys will select tuner presets or tuner frequency. In record
mode the
on appropriately equipped preamplifiers.
prog: In
depending upon the specific preamplifier model in use.
Firstly, the NAC 112 incorporates a programmable volume
control system that enables different source component
output levels to be matched. Secondly, preamplifiers
incorporate optional automatic input switching which will
switch the input as soon as any handset key appropriate to
a particular source is operated. Thirdly, if an audio-visual
processor is connected to the AV input, the volume control
function on on the preamplifier can be disabled, allowing the processor
to take over control of the output level from the
preamplifier stage.
Use of these programmable functions is described fully in
the manual section corresponding to each preamplifier.
In CD mode the
play order to be programmed. To program a play order
select a track number from the
the prog
selection the track number indicated in the player display
will be followed by either
that the track is already selected,
track can be selected while no display indicates that there
is no more memory available.
The prog
order. To delete a track, press and hold the
the prog indicator in the CD display illuminates then delete
the track or tracks using the
scan time by a further operation of the
the track number indicated in the player display will be
mode the followed by either
the track is already deleted,
can be deleted while a space indicates that there is no
more memory available.
The play order can be reviewed by pressing
player is either stopped or playing. The player display will
then scroll through the selected tracks. The prog indicator
on the player display will illuminate when a play order has
been programmed. To clear memory press and hold the
stop key.
In tuner
frequencies to be assigned to preset memory. To assign a
keys will station to a preset first tune manually using the
keys (or scan) to the desired station. Press and hold the
numeric prog key on the handset. The tuner is now in preset
numeric keys will switch between record inputs
preamp mode the prog key function varies
prog key enables specific tracks and their
numeric
key until the desired selection is complete. During
P —
or or no display.
—
indicates that the
key can also be used to delete tracks from a play
numeric
prog
C or —— or no display.
—— indicates that the track
mode the prog key enables specific FM station
keypad followed by
P
indicates
prog key until
keypad followed each
key. During deletion
C indicates that
prog while the
up or down