Classic Sediment & Carbon Plus Filtration Unit
Installation, Operation & Maintenance Guide
# 540723
Model
Thank you for purchasing an Aquatic Life
Classic Sediment & Carbon Plus Water
Filtration Unit.
When maintained properly, this unit will
provide you with years of service.
OVERVIEW
The cartridges on your unit are designed for
easy installation and replacement and fit
inside the white canister housings.
The Sediment cartridge is rated at 5-micron
pore size and will reduce particulates such
as sand, silt, rust and more. The Carbon Plus
cartridge has a 0.5-micron pore size and will
reduce chlorine and chloramines often found
in tap water.
WARNING:
carefully before proceeding with
installation. Your failure to follow
any attached instructions and
operating parameters may lead
to the product's failure.
OPERATING GUIDELINES
DO NOT use with water that is microbiologically
unsafe or of unknown quality without
adequate disinfection before or after the unit.
The maximum incoming water pressure for
the unit is 80 PSI. If the pressure is more than
80 PSI, a pressure regulator is required.
DO NOT operate the unit unattended while
connected to a water supply.
DO NOT operate the unit in direct sunlight,
below 40°F or above 100°F.
For technical assistance or
warranty issues, contact Aquatic Life at
customersupport@aquaticlife.com
1
Please read
Need help?
Do you have a question about the 540723 and is the answer not in the manual?
Questions and answers