Download Print this page

AquaticLife Deionized Spot-Free Car Rinse Plus Installation, Operation, Maintenance Manual

Advertisement

Quick Links

Deionized Spot-Free Car Rinse Plus 2x10
Installation, Operation & Maintenance Guide
OVERVIEW
Water quality is often measured by the amount
of total dissolved solids (TDS) in the water.
It is the TDS in the water that leaves spots
on a vehicle when the water evaporates. By
removing the TDS, a spot-free rinse is achieved.
Removing TDS is accomplished by filtering
the water through a resin that is charged with
Cation and Anion resins (H+ and OH-). As the
resin absorbs the TDS, it will change color.
When the entire resin has changed color,
it is time to replace the DI cartridge.
How Resin Works
OPERATING GUIDELINES
The maximum incoming water pressure for
the unit is 80 PSI. If the pressure is more than
80 PSI, a pressure regulator is required.
Deionized water should not be run through
a copper tube. The pure DI water can leach
copper from the pipe, eventually leading to
holes in the pipe.
DO NOT pressurize and operate the
unit unattended.
For technical assistance or
warranty issues, contact Aquatic Life at
customersupport@aquaticlife.com
Thank you for
purchasing an
Aquatic Life
Deionized Spot-Free
Car Rinse Unit.
When maintained
properly, this unit
will provide you with
years of high-quality
filtered water.
Model# 540710
HOW TO USE
Failure to follow these
steps will deplete your
cartridges quickly and
cost you extra money.
Follow these simple
steps for best results:
Use tap water to
fill soap bucket
Spray vehicle with fine mist of DI Spot-Free Rinse water
To avoid rapid depletion of your cartridges,
DO NOT use the spot-free rinse for steps 1-3.
NOTE:
Filter cartridge life will vary based
on local water conditions & amount of use.
Contents (Model #540710)
Dual DI Unit Housing
1
with Mounting Bracket
1 Plumber's Pipe Tape
Brass ½" MPT x Female
1
Garden Hose Adapter
1 Quick Connect x 1/2" MPT 1 25' Water Saver Hose
2 ½" Rubber Washers
1 Installation, Operation & Maintenance Guide
Installation Instructions
Wet vehicle with tap water
Rinse soap off vehicle
with tap water
Color-changing
2
Deionization Cartridges
1 Canister Wrench
Quick Connect x Male
1
Garden Hose Thread
2 ¾" Rubber Washer

Advertisement

loading

Summary of Contents for AquaticLife Deionized Spot-Free Car Rinse Plus

  • Page 1 Deionized Spot-Free Car Rinse Plus 2x10 Installation, Operation & Maintenance Guide Model# 540710 Thank you for ➊ HOW TO USE purchasing an Failure to follow these Aquatic Life steps will deplete your Deionized Spot-Free Car Rinse Unit. cartridges quickly and cost you extra money.
  • Page 2 Model# 540710 Deionized Spot-Free Car Rinse Plus 2x10 Installation, Operation & Maintenance Guide www.aquaticlife.com INSTALL THE ADAPTER MOUNTING THE UNIT HOSE & NOZZLE INSTALLATION UNIT MAINTENANCE Use a hose with standard garden hose threads The deionization cartridges are designed Step 1 – Apply three wraps of the pipe tape...
  • Page 3 Deionized Spot-Free Car Rinse Plus 2x10 Installation, Operation & Maintenance Guide Model# 540710 No cash refunds will be made. This warranty is provided solely OPERATION & CONSIDERATIONS to the original consumer purchaser of the product and may • Operating pressure greater than 80 PSI not be transferred or assigned.

This manual is also suitable for:

540710