NAIM AV2 Owner's Manual page 8

6.0 av2 basics and quick setup
6.3 speaker setup routine
one
Enter setup mode.
Handset: press menu followed by mode
Front panel: press and hold mode.
two
Scroll up or down parameter list.
Handset: press 2
Front panel: press input or mode.
three
Adjust setting
Handset: press 4 or 6
Front panel: rotate rotary control
setup parameters
main speakers (size)
centre speaker (presence, size)
surround speakers (presence, size)
extra rear speakers (presence, quantity, size)
sub-woofer (presence)
speaker distance units (feet, metres)
left main speaker (distance, ft or m)
centre speaker (distance, ft or m)
right main speaker (distance, ft or m)
right surround speaker (distance, ft or m)
right extra rear speaker (distance, ft or m)
left extra rear speaker (distance, ft or m)
left surround speaker (distance, ft or m)
sub-woofer (distance, ft or m)
test signal (off, on)
main left speaker (level trim)
centre speaker (level trim)
main right speaker (level trim)
right surround speaker (level trim)
right extra rear speaker (level trim)
left extra rear speaker (level trim)
left surround speaker (level trim)
sub-woofer (level trim)
four
Exit setup mode.
Handset: press menu followed by mode
Front panel: press and hold mode.
menu
.
2
or 8
4
menu
mode
or
mode
8
or
or
input
6
or
parameter settings
mode
or
mode
mode
note
Some parameter options in the
speaker setup routine are
interrelated. For example, if NO
is specified for a specific
speaker, its setup options will
be unavailable. Similarly, if NO
sub-woofer is specified, only a
default option will be available
for the main left and right
speakers.
note
The av2 user interface allows
continuous scrolling through
the speaker level setup stages.
note
The handset vol and vol
keys must be used initially to
set the overall volume when
the test function is engaged.
7