Advertisement
Quick Links
PLUTO 2-ENDED UMBRELLA
300X300/8-109/68
ASSEMBLY INSTRUCTIONS
READ & SAVE BELOW INSTRUCTIONS BEFORE ASSEMBLY
1. PLEASE SEPARATE AND IDENTIFY ALL PARTS,MAKING SURE THAT YOU HAVE ALL OF THE PARTS LISTED.
2. TO AVOID ANY SCRATCH DURING ASSEMBLY, PLEASE ASSEMBLE ON A SOFT MAT OR SIMILAR.
3. PLEASE ASSEMBLE STEP BY STEP AND FOLLOW THE INSTRUCTIONS.
4. WASHERS MUST BE USED.
5. WHILE EACH SCREW AND NUT IS PROPERLY FASTENED, DO NOT OVER FASTEN IT.
6. DO NOT COMPLETELY FASTEN EACH SCREW AND NUT UNTIL ALL THE SCREWS ARE PROPERLY FIXED.
2
x
1
Advertisement
Related Manuals for Grand PATIO PLUTO
Summary of Contents for Grand PATIO PLUTO
- Page 1 PLUTO 2-ENDED UMBRELLA 300X300/8-109/68 ASSEMBLY INSTRUCTIONS READ & SAVE BELOW INSTRUCTIONS BEFORE ASSEMBLY 1. PLEASE SEPARATE AND IDENTIFY ALL PARTS,MAKING SURE THAT YOU HAVE ALL OF THE PARTS LISTED. 2. TO AVOID ANY SCRATCH DURING ASSEMBLY, PLEASE ASSEMBLE ON A SOFT MAT OR SIMILAR.
- Page 2 C1x1 C2x1 Don't tighten up the screw before you start next mounting during the Install all the relevant screws,but do not tighten them completely at the very beginning. installation. Tighten the screws fully one by one.
- Page 10 CARE AND CLEANING: 1. TO CLEAN,WIPE WITH DAMP CLOTH.DO NOT USE BLEACH,ACID SOLVENTS OR ABRASIVE CLEANERS OR FRAME PARTS. 2. DURING VARYING WEATHER CONDITIONS AND WINTER PERIOD,WE STRONGLY RECOMMEND THAT IT CAN BE STORED IN A DRY AREA WITH A SUITABLE COVER BEFORE STORAGE,PLS ENSURE IT IS CLEAN AND DRY. 3.
- Page 13 x8 x8 x6 x6...
- Page 15 Not included...
- Page 16 x8 x8 x6 x6 32 Repeat 7-9...
Need help?
Do you have a question about the PLUTO and is the answer not in the manual?
Questions and answers