Advertisement
Quick Links
GOODMAN STEEL KD
SLING LOUNGE CHAIR
ASSEMBLY INSTRUCTIONS
READ & SAVE BELOW INSTRUCTIONS BEFORE ASSEMBLY
1.PLEASE SEPARATE AND IDENTIFY ALL PARTS,MAKING SURE THAT YOU HAVE ALL OF THE PARTS LISTED.
2.TO AVOID ANY SCRATCH DURING ASSEMBLY, PLEASE ASSEMBLE ON A SOFT MAT OR SIMILAR.
3.PLEASE ASSEMBLE STEP BY STEP AND FOLLOW THE INSTRUCTIONS.
4.WASHERS MUST BE USED.
5.WHILE EACH SCREW AND NUT IS PROPERLY FASTENED, DO NOT OVER FASTEN IT.
6.DO NOT COMPLETELY FASTEN EACH SCREW AND NUT UNTIL ALL THE SCREWS ARE PROPERLY FIXED.
x1
1
x1
4
Ax10
Bx10
Install all the relevant screws,but do not tighten them completely at the very beginning.
Tighten the screws fully one by one.
x1
5
Cx2
Dx24
x1
2
x2
6
7
Ex2
Fx4
Gx2
Don't tighten up the screw before you start next mounting during the
installation.
x1
3
x2
Hx2
Ix1
1
x
Jx1
1
Advertisement
Related Manuals for Grand PATIO GOODMAN STEEL KD
Summary of Contents for Grand PATIO GOODMAN STEEL KD
- Page 1 GOODMAN STEEL KD SLING LOUNGE CHAIR ASSEMBLY INSTRUCTIONS READ & SAVE BELOW INSTRUCTIONS BEFORE ASSEMBLY 1.PLEASE SEPARATE AND IDENTIFY ALL PARTS,MAKING SURE THAT YOU HAVE ALL OF THE PARTS LISTED. 2.TO AVOID ANY SCRATCH DURING ASSEMBLY, PLEASE ASSEMBLE ON A SOFT MAT OR SIMILAR.
- Page 2 Do not completely fasten each screw Do not completely fasten each screw Do not completely fasten each screw...
- Page 3 Do not completely fasten each screw Do not completely fasten each screw ① ② NOTICE: tighten the screws fully one by one ③ (STEP 2-5) before STEP 6 ④ ④ ③ ② ① CARE AND CLEANING: 1. TO CLEAN,WIPE WITH DAMP CLOTH.DO NOT USE BLEACH,ACID SOLVENTS OR ABRASIVE CLEANERS OR FRAME PARTS. 2.
Need help?
Do you have a question about the GOODMAN STEEL KD and is the answer not in the manual?
Questions and answers
can i order a screw kit that includes the screws and washers? This is for the sling lounge chair item no. 765.0260