Westinghouse SK-42H330S - 42" LCD TV User Manual page 28

4
OSD FUNCTION
Function Name
DPMS Mode
Power On Plug
Inactivity Off
Sleep
Power Mode
LED
Autosource™
Enable / Disable the Display Power Management Signaling
which allows the display to go into Standby mode when there is
no signal coming in from the selected input.
Enable High Definition LCD TV to automatically turn on when
power is restored.
Sets the High Definition LCD TV to turn off after a specified time
of no remote or panel button presses. Four options available:
• Off
• 1 hour
• 3 hours
• 6 hours
Sets the High Definition LCD TV to turn off after a specified
amount of time:
• Off
• 30 minutes
• 60 minutes
• 90 minutes
• 120 minutes
NOTE:
The High Definition LCD TV will take a few seconds to come back
from sleep mode.
Sets the power boot up mode:
• E. Saver – takes longer to come back from Standby but
requires less power
• Normal – takes faster to come back from Standby but
requires more power
Turns the LED on the TV on and off
Autosource™ will
automatically switch the input source to the connection of the
new source's device.
26
Function
detect a new incoming signal and