Suitable for driving an appropriate Metabo flexible f) Mandrel mounted wheels, sanding drums, shaft. cutters or other accessories must be fully The user bears sole responsibility for any damage inserted into the collet or chuck.
Page 5
ENGLISH en appropriate, wear dust mask, hearing stalling of the rotating accessory which in turn causes the uncontrolled power tool to be forced in protectors, gloves and workshop apron capable of stopping small abrasive or the direction opposite of the accessory’s rotation. workpiece fragments.
Page 6
ENGLISH d) Do not position your hand in line with and Accessories must be stored and handled with care behind the rotating wheel. When the wheel, at the in accordance with the manufacturer's instructions. point of operation, is moving away from your hand, Never use cut-off wheels for roughing work! Do not the possible kickback may propel the spinning apply pressure to the side of cut-off wheels.
Li-Ion battery Instructions on charging the battery pack can be packs. If necessary, consult your freight forwarder. found in the operating instructions of the Metabo Certified packaging is available from Metabo. charger. Only send the battery pack if the housing is intact In case of Li-Ion battery packs with capacity and and no fluid is leaking.
Page 8
BL 11-28, use the 13-mm spanner provided for this Routing: Press gently and evenly on the machine. purpose. For the GVB 18 LTX BL 11-28, GVB 18 LTX BL 11-7 HT, GVPB 18 LTX BL 11-28, press the Cut-off grinding: spindle locking button (4)).
10. Accessories machines, packaging and accessories. Battery packs must not be disposed of with regular Use only original Metabo or CAS (Cordless Alliance waste! Please return faulty or used battery packs to System) battery packs and accessories. your Metabo dealer! Use only accessories that fulfil the requirements Do not throw battery packs into water.
Need help?
Do you have a question about the GVB 18 LTX BL 11-28 and is the answer not in the manual?
Questions and answers