Metabo W 18 7-125 Original Instructions Manual

Metabo W 18 7-125 Original Instructions Manual

Hide thumbs Also See for W 18 7-125:

Advertisement

Quick Links

W 18 7-115
W 18 7-125
W 18 L 9-115
W 18 L 9-125
W 18 L 9-125 Quick
W 18 L BL 9-100
W 18 L BL 9-115
W 18 L BL 9-125
de Originalbetriebsanleitung 5
en Original instructions 13
fr
Notice originale 21
nl
Oorspronkelijke gebruiksaanwijzing 29
it
Istruzioni originali 37
es Manual original 45
pt
Manual original 54
sv Originalbruksanvisning 62
fi
Alkuperäiset ohjeet 69
www.metabo.com
no Original bruksanvisning 77
da Original brugsanvisning 84
pl
Instrukcja oryginalna 92
el
Πρωτότυπες οδηγίες λειτουργίας 100
hu Eredeti használati utasítás 109
ru
Оригинальное руководство по
эксплуатации 117
uk Оригінальна інструкція з
експлуатації 127

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the W 18 7-125 and is the answer not in the manual?

Questions and answers

Summary of Contents for Metabo W 18 7-125

  • Page 1 W 18 7-115 W 18 7-125 W 18 L 9-115 W 18 L 9-125 W 18 L 9-125 Quick W 18 L BL 9-100 W 18 L BL 9-115 W 18 L BL 9-125 de Originalbetriebsanleitung 5 no Original bruksanvisning 77...
  • Page 2 9 10 11...
  • Page 3 86/3 dB(A) 97/3 *2) 2011/65/EU, 2006/42/EC, 2014/30/EU *3) EN 60745-1:2009+A11:2010, EN 60745-2-3:2011 +A2:2013+A11:2014+A12:2014+A13:2015, EN IEC 63000:2018 2022-01-11, Bernd Fleischmann Direktor Produktentstehung & Qualität (Vice President Product Engineering & Quality) *4) Metabowerke GmbH - Metabo-Allee 1 - 72622 Nuertingen, Germany...
  • Page 4 TYPE A TYPE B TYPE C CLICK = 100 mm (4“) 630346000 1 / 2 = 115 mm (4 “) 630351000 TYPE = 125 mm (5“) 630352000 B / C A / C ASC 145 ASC 55 etc. A / C 4,0 Ah 625027000 5,2 Ah...
  • Page 5: Declaration Of Conformity

    The cordless angle grinders, when fitted with f) The outside diameter and the thickness of original Metabo accessories, are suitable for your accessory must be within the capacity grinding, sanding, cutting-off and wire brushing rating of your power tool.
  • Page 6 ENGLISH away and cause injury beyond immediate area of d) Use special care when working corners, operation. sharp edges etc. Avoid bouncing and snagging the accessory. Corners, sharp edges or bouncing k) When carrying out tasks that involve a risk of have a tendency to snag the rotating accessory and the mounted tool contacting hidden wiring, cause loss of control or kickback.
  • Page 7 ENGLISH en c) When the wheel is binding or when wheels, always use the parting safety guard for interrupting a cut for any reason, switch off the safety reasons. power tool and hold it motionless until the Do not use any segmented diamond cut-off wheels wheel comes to a complete stop.
  • Page 8 - Lead from lead-based paints, packs. If necessary, consult your freight forwarder. - Crystalline silica from bricks and cement and Certified packaging is available from Metabo. other masonry products, and Only send the battery pack if the housing is intact - Arsenic and chromium from chemically treated and no fluid is leaking.
  • Page 9: Initial Operation

    - Fit the support flange (3) on the spindle. The flange should not turn on the spindle when W 18 L 9-115, W 18 L 9-125, W 18 7-125, properly attached. W 18 7-115, W 18 L BL 9-100: - Place the grinding wheel on the support flange (3).
  • Page 10: Troubleshooting

    11. Accessories always switch it off when the battery pack is removed from the machine. Use only original Metabo or CAS (Cordless Alliance In continuous operation, the machine System) battery packs and accessories. continues running if it is forced out of your See page 4.
  • Page 11: Environmental Protection

    Repairs to electrical tools must be carried out Recommended ambient temperature when by qualified electricians ONLY! charging: 0 °C (32 °F) to 40 °C (104°F). Contact your local Metabo representative if you Direct current have Metabo power tools requiring repairs. For addresses see www.metabo.com.
  • Page 12 ENGLISH Typical A-effective perceived sound levels: = Sound pressure level = Acoustic power level = Uncertainty During operation the noise level can exceed 80 dB(A). Wear ear protectors!

Table of Contents