Advertisement
INTRODUCTION
The versatile Cuisinart
PrepExpress
®
™
Handheld Food Processor puts expert food
preparation at your fingertips. This elegant
unit slices, shreds and grates with ease. Just
pick it up to process directly into a bowl or
operate it on the countertop – either way it's
fast, powerful and safe to use.
Pusher
On/Off Switch
Feed Tube
Drums
Food
Chamber
Motorized
Housing
Base
3
PARTS AND FEATURES
1. motorized housing base with on/off
switch and handle
2. Food chamber
3. Pusher
4. Slicing drum
5. Shredding drum
6. Grating/Fine Shredding drum
Slicing
Shredding
Grating/Fine
Drum
Drum
Shredding Drum
1. Insert drum into food chamber.
2. Insert food chamber into base.
ASSEmBLY/USAGE
INSTRUCTIONS
1. Select the drum that will be used and
insert it into the chute opening. The
exterior metal portions of the drums are
sharp. Handle them carefully.
2. Attach the food chamber assembly to
the motorized base. With the handle in
your right hand and holding the food
chamber at a 15° angle, line up the line
on the food chamber with the line on the
housing. The driving end of the assembly
must be fully inserted into the socket of
the motorized base. Next, while pushing
the food chamber assembly firmly in
toward the handle, rotate the assembly
counterclockwise until it is upright and
it is centered with the handle.
3. Plug cord in and load the food chamber.
For best results, it is important that the
food be prepared and properly placed
in the food chamber as follows:
• Cut food so that it will easily fit into the
feed tube.
• Stack food upright into the feed tube
for short pieces or vertically for longer
pieces.
4. Begin processing by pushing down the
switch and evenly pushing the food
down, using the pusher.
5. The processed food will be released from
the front of the unit, directly into your
bowl or platter.
4
Advertisement
