Advertisement
Quick Links
Advertisement
Related Manuals for Westcott QUICK-MOUNT S-BRACKET 2
Summary of Contents for Westcott QUICK-MOUNT S-BRACKET 2
- Page 1 QUICK-MOUNT S-BRACKET 2 QUICK START GUIDE...
- Page 2 Overview Cold Shoe Mounts (3 total) Thumb Tab Ladder Strap Release Tab Release Pin Rear View Built-in Tilter Bracket with 5/8" Receiver Light Stand Tension Knob Bowens S-Type Accessory Mount Umbrella Receptacle (9mm) Umbrella Tension Knob Front View...
- Page 3 Introduction This guide provides an overview of setup and basic operation. Visit fjwestcott.com/manuals for video instructions and to download a digital copy of this guide. Warning • Do not exceed maximum load capacity (20 lbs. / 9.1 kg). • Failure to secure products during use could result in permanent damage of lighting gear.
- Page 4 Mounting Speedlights to the S-Bracket 2 Perimeter 1. Ensure the speedlight shoe is in the unlocked position. 2. Completely slide the speedlight shoe into one of the S-Bracket 2’s cold shoes on its perimeter. 3. While holding the speedlight, lock the speedlight into place by engaging the speedlight’s locking mechanism.
- Page 5 Mounting an Umbrella 1. Loosen the umbrella tension knob. (Do not remove.) 2. Insert the umbrella shaft into the umbrella receptacle and slide into the desired position. 3. Tighten the umbrella tension knob to secure the umbrella in place.
-
Page 6: Warranty
Warranty Period, at its option and to the extent permitted by law, Westcott will either (1) repair the defect at no charge, using new or refurbished replacement parts, or (2) exchange the product with a product that is new or which has been manufactured from new or serviceable used parts and is at least functionally equivalent to the original product.
Need help?
Do you have a question about the QUICK-MOUNT S-BRACKET 2 and is the answer not in the manual?
Questions and answers