Download (Download); Download; Data Initialization Mode (Clear); Clear - Canon MF7200 Series Service Manual

Chapter 14
#PRINT>#PRINT NUMERIC
031
032
033
034
035
036
037
038
039
#SCAN>#SCAN NUMERIC
body No:BFDxxxxx

14.12 Download (DOWNLOAD)

14.12.1 Download

The following parts of this unit can be upgraded by executing download mode using the service support tool (SST) (for more information, see the "Upgrading"
section):
Main unit
- Flash ROM (system + boot) mounted on the image processor PCB
Accessory
- ROM mounted on the finisher controller PCB
- ROM mounted on the PCL board

14.13 Data Initialization Mode (CLEAR)

14.13.1 Clear

Group
TEL & USER DATA
SERVICE DATA
COUNTER
TYPE
SOFT-CNT
HST
CARD
ERR
PWD
FILE SYSTEM
FORMAT
ALL

14.14 Error Display (ERROR DISPLAY)

14.14.1 Error Display

An error code is displayed when a service error has occurred. The E code is displayed in the upper step, and the detail code is displayed the bottom step.
14-30
FACTORY 1 2
50
50
50
100
100
100
100
100
100
Item
Clears all user-registered and -set areas of telephone registration data and user data.
(Telephone registration refers to the registration of codes on one-touch dialing,
abbreviated dialing, and group dialing.)
Clears the system dump list, except for counters and clear dates.
Clears the maintenance counter, parts counter and mode-specific counters.
Initializes the counter (numerator) in the system dump list.
Initializes user data and service data to suit specified destination settings.
Not used
ACTIVITY Initializes the activity report
ACCOUNT Clears print histories.
JAM Clears the jam history.
ERR Clear the error (error code) history.
ALARM Clears the alarm history.
Clears department management information held in the controller before the card
reader is demounted.
E355 Not used
E719 Clears card reader errors.
Clears the system administrator's password.
Delete unnecessary language files in the USB memory.
USB MEMORY Format the USB memory. (This mode is used when the USB memory error is damaged
and E744 occurs.)
LICENSE Not used
DRIVE
Clears user and service data (except for some scan parameters and print parameters),
and the counter setting/registration data in the system dump list, except for the print
count.
#SCAN>#SCAN NUMERIC
3 FACTORY 1
026
031
032
033
034
041
042
043
044
045
046
047
048
054
213
214
215
F-14-11
Explanation
2 3
0012-4024
0012-4025
0012-5470