Advertisement
Quick Links
art:
RFSMK
T E C H N I C A L M A N U A L
Wireless smoke and heat
detector
RFSMK is a wireless sensor which combines smoke
and heat detection. Equipped with an anti-jamming
switch, LED with 360° visibility and auto-balanced
optical chamber, it is suitable for 24-hour protection
of rooms.
DESCRIPTION
2
1
7
8
1. Anti-jamming switch
2. Register key (ENROLL)
3. Reset key
4. 3-Colour LED
5. CR123A battery
6. Battery tab
7. Alarm indication LEDs
8. Fixing holes
TECHNICAL SPECIFICATIONS
RF communication
3
4
5
6
Thermal sensitivity RoR 10°C/min (max.
Low voltage threshold 2.6 V
Current absorbed (TX
Operating temperature
REGISTRATION
Refer to the full control panel programming
8
manual for further information.
√ Make sure the sensor has not been registered
previously. If it has, follow the reset procedure.
1. Access the RF radio zone registration menu.
2. Select the zone you want to acquire and confirm:
the control panel will now wait to receive a
registration signal from the device.
Bidirectional
type
Frequency band 868.05 - 869.95 MHz
Conformity class
A1/R
EN54-5
60°C)
26 mA / 4 μA
/ Standby)
EMC immunity EN 50130-4
-10 to 50°C
range
Dimensions 103 x 130 x 56 mm
Advertisement
Related Manuals for Comelit RFSMK
Summary of Contents for Comelit RFSMK
- Page 1 Wireless smoke and heat 1. Anti-jamming switch 2. Register key (ENROLL) detector 3. Reset key RFSMK is a wireless sensor which combines smoke 4. 3-Colour LED and heat detection. Equipped with an anti-jamming 5. CR123A battery switch, LED with 360° visibility and auto-balanced optical chamber, it is suitable for 24-hour protection 6.
- Page 2 MOUNTING At this point there are two ways of registering the sensor on the control panel: • Option A: remove the battery removal tab (if present on the device). • Option B: press the register key (ENROLL) on the sensor. »...
Need help?
Do you have a question about the RFSMK and is the answer not in the manual?
Questions and answers