Hitachi L32A403 - 31.51" LCD TV Operating Manual page 21

How to Use the Remote to Control your TV
ASPECT button
9
Press this button to quickly change the picture format ASPECT ratio. Depending on the input ratio allows you to adjust the images
through the following options.
AUTO
Use this aspect mode to have the aspect mode change automat:
cally by signal detector.
4:3
Use this aspect mode to display conventional (4:3) images. Side
panels (black areas) are placed to the left and right of the image to
preserve the original aspect ratio of the source.
16:9
Use this aspect mode to display 16:9 sources like HDTV and DVD's
preserving the original 16:9 aspect ratio showing 95% of the size.
• AIR/CABLE - Analog Signal
• AIR/CABLE - Digital Signal
• Component
• AV
• HDMI - VGA
• DVI - VGA
• RGB
• HDMI - 1080p/1080i/720p/480p/480i
• DVI - 1080p/1080i/720p/480p/480i
NOTES
• Each input has a memory for the Aspect setting. Changing the aspect on one input will not affect the aspect settings on
other inputs.
• When displaying "Full" you may notice noise at the top of the picture. Select the "16:9" aspect mode to remove the noise.
The noise is normal for some signals.
• See page 50 for Aspect availability according to signal format in use.
Full
Use this aspect mode to display 16:9 sources like HDTV and
DVD's preserving the original 16:9 aspect ratio showing 100% of
the size.
ZOOM1/ZOOM2
Use these aspect modes to zoom in on to reduce the black bars
sources.
IMAGE INPUT AUTO
ZOOM 2
IMAGE INPUT 4:3
ZOOM2
AUTO
IMAGE INPUT
AUTO
IMAGE INPUT
ZOOM2
4:3 16:9
ZOOM 1
16:9
ZOOM1
Full
4:3
16:9
Full
ZOOM1
21