Table of Contents
Advertisement
3.4
Adjusting Channel Settings
1
Press MENU to enter the OSD Main Menu
screen.
2
Press
/
on the remote control or
CH
/ CH
on the control panel to select
Channel menu.
3
Press
/ OK on the remote control or
INPUT/ VOL+ on the control panel to enter
the Channel menu.
4
Press
/
on the remote control or CH
item.
5
Press
/ OK on the remote control or INPUT/ VOL+ on the control panel to enter
the item.
6
Press
/
on the remote control or
the scales or press OK on the remote control or INPUT/ VOL+ on the control panel to
mark an item.
7
Press RETURN to return to the Channel menu.
8
Press MENU/ VOL- to exit the Channel menu.
9
The Channel menu can be used to perform a channel search and edit channel list
(see "Performing an Automatic Channel Search" on page 27 and "Editing Channel
Table or Favorite Channel" on page 28).
•The Antenna can be set to
•The Scan Mode can be set to
•The Auto Scan can be set to
Note:
The Channel settings are available when the signal is set to TV source.
30
Picture
Audio
Channel
V-CHIP
Setup
/ CH
VOL+
VOL-
/
Air
or Cable.
Auto
, Analog, or Digital.
Auto
, Standard, HRC, or IRC.
Antenna
Scan Mode
Auto Scan
Channel List
Move
Enter
Return
Exit
OK
Return
Menu
on the control panel to select an
on the control panel to change
Advertisement
Table of Contents
