Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Trotec TVE S Series
Summary of Contents for Trotec TVE S Series
- Page 1 TVE 23 S INSTRUCTIONS PEDESTAL FAN...
-
Page 2: Table Of Contents
Information on the use of these instructions ....... 2 Safety .................. 2 Information about the device.......... 4 TVE 23 S Transport and storage............ 4 Assembly and start-up............ 5 https://hub.trotec.com/?id=43275 Operation ................ 8 Safety Errors and faults.............. 9 Read this manual carefully before starting or using the Maintenance ................ 9 device. -
Page 3: Personnel Qualification
• Ensure that all electric cables outside of the device are Personnel qualification protected from damage (e.g. caused by animals). Never People who use this device must: use the device if electric cables or the power connection • be aware of the dangers that occur when working with are damaged! electric devices in damp areas. -
Page 4: Information About The Device
Designation Information about the device Protective grid Device description Pole The pedestal fans of the TVE S series are suitable for indoor air Foot circulation. Locking screw for the operating element device TVE 23 S comes with the following features: Locking screw for the rods •... -
Page 5: Assembly And Start-Up
Connecting the operating element and pole Assembly and start-up 1. Connect the upper part of the pole to the lower part, and fix both parts using the locking screw for the rods (4). Scope of delivery 2. Connect the operating element (6) to the upper part of the •... - Page 6 Fastening the impeller on the motor spindle Setting the fan's inclination angle 1. Fit the impeller (14) on the motor spindle (11). The inclination angle of the fan can be manually adjusted by up 2. Fasten the impeller (14) using the impeller retaining to 30°.
- Page 7 Adjusting the height Start-up The fan height can be adjusted to 2 positions. When positioning the device, observe the minimum distance 1. Remove the lower rod element to adjust the fan height from walls or other objects as described in the chapter from 130 cm to 96 cm (see section Connecting the Technical annex.
-
Page 8: Operation
Using the oscillation function Operation By means of the oscillation function you can achieve consistent Operating element ventilation. ü The device is switched on and operating. 1. Press the Oscillation pin (7) so that it locks in place. Designation Meaning Control dial Switches the fan on or off: Stage 0 = off Stage 1 = low... -
Page 9: Errors And Faults
Shutdown Maintenance Warning of electrical voltage Activities required before starting maintenance Do not touch the mains plug with wet or damp hands. • Switch off the device. Warning of electrical voltage • Disconnect the device from the mains by removing the Do not touch the mains plug with wet or damp hands. -
Page 10: Technical Annex
Fan blade diameter 40 cm also find out about other return options that apply for many Sound pressure level EU countries on the website https://hub.trotec.com/?id=45090. 60 dB(A) (at 1 m distance, stage 3) Otherwise, please contact an official recycling centre for Weight 5.5 kg... - Page 11 Trotec GmbH Grebbener Str. 7 52525 Heinsberg Germany +49 2452 962-0 +49 2452 962-200 online@trotec.com www.trotec.com...
Need help?
Do you have a question about the TVE S Series and is the answer not in the manual?
Questions and answers