OBSBOT Tail 2 Quick Start Manual page 2

Product Overview
Parts Info
02
01
03
06
07
05
04
08
01. Camera Lens
02. Tally Light
03. Status Indicator
04. Battery Indicator
05. Cooling Inlet
06. HDMI Port
07. MIC IN Port
08. LINE IN Port
09. RS232 IN Port
10. RS232 OUT Port
Charging Instructions
When using the camera for the first time, please charge it using the included USB-C power
cable to ensure proper functionality.
⚠ It is recommended to use an FCC/CE certified adapter that supports the USB PD3.0 protocol
and has a power output of at least 25W.
�
11
14
16
17
09 10 12 13 15
11. Power Button
12. 3G-SDI Port
13. LAN/PoE+ Port
14. USB-C Port
15. Power Input Port
16. Micro SD Card Slot
17. Cooling Outlet
18. UNC 1/4-20 Interface
19. Extension Pin Interface
Battery Indicator
Type Capacity
0%-10%
11%-25%
26%-30%
Battery
Detection
31%-45%
Upon
18
Pressing
46%-60%
the Power
19
Button
61%-75%
76%-95%
96%-100%
0%-10%
11%-25%
26%-45%
Discharging
46%-75%
76%-100%
0%-25%
26%-45%
Charging
46%-75%
76%-95%
96%-100%
⚠ Charging will stop when the battery temperature exceeds 45°C.
For example, when connected to an external power supply, if the battery temperature exceeds
45°C, the camera will stop charging and will be powered directly from the external power supply.
Tally Light
NDI Video Stream Status
Program
Preview
Not In Use
Steady Blue Flashing Blue
LED 1 LED 2 LED 3
Indicator Statuses
Solid red light
Solid green light
Light Off
OFF
LED 4
�