Download Print this page
CyberPower P1208UC15BK Manual
CyberPower P1208UC15BK Manual

CyberPower P1208UC15BK Manual

12-outlet surge protector with 2 usb ports

Advertisement

Quick Links

YOUR ULTIMATE ALLY IN POWER
12-OUTLET
SURGE PROTECTOR
with 2 USB PORTS
P1208UC15BK
1
3
5
Cyber Power Systems (USA), Inc.
4241 12th Avenue East, Suite 400 | Shakopee, MN 55379
FEATURES
1. ON/OFF Reset Control Switch and Circuit Breaker
Controls power to all outlets. The switch is also a
15A breaker. When an overload occurs, it will
automatically switch o˜. To resume operation,
ensure the overload condition is removed and reset
the surge protector by switching the unit ON.
2. Protected LED Indicator
Illuminated when the surge protection feature is
working properly.
3. Grounded LED Indicator
Illuminated when the surge protector is
properly grounded.
4. Standard Grounded Outlets (12)
7
5. USB-A Charging Port (1)
6. USB-C Charging Port (1)
7. Power Cord
2
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK:
Use only in dry locations and only indoors.
6
DO NOT plug into another relocatable power tap.
DO NOT "daisy chain" surge protectors.
DO NOT use with any aquarium equipment.
DO NOT use if properly grounded outlets are not available.
DO NOT install this device if there is less than 10 meters (30 feet) of wire between
the electrical outlet and electrical service panel.
DO NOT use for medical or life support equipment. This device features an internal
protection that will disconnect the surge protective component at the end of its
useful life, but it will maintain unprotected power to the load.
4
FOR MORE INFORMATION
Visit CyberPowerSystems.com for more information regarding:
• Product information and certifications
• Product warranty
• Connected equipment guarantee
CONFORMANCE APPROVALS
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may
cause undesired operation.
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
SPECIFICATIONS
Model Number:
Outlets:
Power Cord Length:
Surge Protection:
USB-A Charging Port (1): 5V/2.4A
USB-C Charging Port (1):
USB Total Output:
Electrical Rating:
UL Clamping Voltage:
Maximum Peak Current:
3 AC Lines Protected:
Response Time:
Circuit Breaker:
i
WARNING: This product can expose you to chemicals including vinyl chloride
and bisphenol A (BPA), which is known to the State of California to cause cancer
and birth defects or other reproductive harm. For more information go to www.
P65Warnings.ca.gov.
TROUBLESHOOTING
If the ON/OFF Reset Control switches to the OFF position, the 15-amp circuit
breaker may have been tripped. Examine your connected equipment and remove
the device overloading the circuit, causing the trip. Then, turn the ON/OFF Reset
Control back to RESET.
If the GROUNDED indicator does not light when you plug in the surge protector,
move the surge protector to a di˜erent grounded three-prong AC outlet. If the
GROUNDED indicator still does not light and the surge protector appears to be
working correctly, your outlets may not be properly grounded and should be
repaired by a professional electrician.
If the PROTECTED indicator does not light, the surge protector's outlets are no
longer protected from power surges or spikes. The surge protector may have
received a power surge or spike beyond its specified limits that have overloaded
the protection circuitry and rendered it inactive. The surge protector has
protected your connected equipment as designed, but it will not protect against
future surges and spikes. It should be replaced.
TECHNICAL SUPPORT
Visit: CyberPowerSystems.com/support
Toll-Free: 1-877-297-6937
© 2025 Cyber Power Systems (USA), Inc. All rights reserved.
CyberPower and the CyberPower logo are trademarks of Cyber Power
Systems, Inc., and/or affiliates, which are registered in many countries and
regions. All other trademarks are the property of their respective owners.
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined
by turning the equipment on and o˜, the user is encouraged to try to
P1208UC15BK
Standard Grounded Outlets (12)
8 ft
3000 Joules
5V/3A
18W
125V/15A/1875W
UL1449 4th/800V(L-N, L-G, N-G)
75,000 A
L-N: 45,000 A; L-G: 15,000 A;
N-G: 15,000 A
Less than 1 nanosecond
Resettable 15 Amp
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit di˜erent from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
WARNING: Changes or modifications not expressly approved by the
party responsible for compliance could void the user' s authority to
K01-E000123-00

Advertisement

loading
Need help?

Need help?

Do you have a question about the P1208UC15BK and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for CyberPower P1208UC15BK

  • Page 1 • Connected equipment guarantee © 2025 Cyber Power Systems (USA), Inc. All rights reserved. CyberPower and the CyberPower logo are trademarks of Cyber Power Systems, Inc., and/or affiliates, which are registered in many countries and regions. All other trademarks are the property of their respective owners.
  • Page 2 operate the equipment. These limits are designed to provide reasonable protection against correct the interference by one or more of the following measures: CyberPowerSystems.com K01-E000123-00...