Freedom Scientific RUBY 10 Safety And Care Manual page 3

Contacting Product Support
For product support, contact your Freedom Scientific dealer or email
support@FreedomScientific.com
8:30 AM and 7 PM ET. If any serious incident occurs in relation to the
RUBY 10, report to Freedom Scientific and the competent authority of the
country or Member State where you are established.
Freedom Scientific, 17757 US Hwy 19 N #200, Clearwater, FL 33764,
United States, www.FreedomScientific.com
Optelec Nederland BV, Pesetastraat 5a, 2991 XT, Barendrecht, The
Netherlands, www.in.Optelec.com
Operating Conditions
Temperature +10°C to 35°C /
50°F to 95°F
Relative humidity < 70%, no
condensation
Altitudes up to 3,000 m (9,842 ft)
Pressure 700 – 1060 hPa
RUBY 10 is tested by a recognized body and independent laboratory for safety
and regulatory compliance.
Description
FCC / EMC
Safety
CE / EMC
Usability
Risk management
ICC
Environmental
Environmental
Environmental
Safety (battery)
Transportation
(battery)
RUBY 10 Safety and Care
or call +1 727-803-8600 weekdays between
Storage and Transportation
Conditions
Temperature +10°C to 40°C /
50°F to 104°F
Relative humidity < 95%, no
condensation
Altitudes up to 12,192 m (40,000 ft)
Pressure 186 – 1060 hPa
Requirement
47 CFR Part 15 FCC Class B
UL/EN/CSA 62638-1:2014; IEC 60601-1:2012 reprint
EN 55022:2010; IEC 60601-1-2:2014;
EN 60601-1-2:2015
IEC 60601-1-6:2013, IEC 62366:2015
ISO 14971:2019
CAN/CSA-CISPR22-10
Consumer Product Safety Improvement Act of 2008
FDA/OSHA/EPA regulations for toxic substances
California Proposition 65
IEC62133-2:2017 CB report
UN38.3 6th revision, amend 1/CNAS/SDS
3