Page 1 Technical Support and E-Warranty Certificate www.vevor.com/support Commercial Blender Manual MODEL: IB350CV We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us.
Page 2 This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.
Page 3 Warning-To reduce the risk of injury, user must read instructions manual carefully. This product is subject to the provision of European Directive 2012/19/EC. The symbol showing a wheelie bin crossed through indicates that the product requires separate refuse collection in the European Union. This applies to the product and all accessories marked with this symbol.
Page 4 SAFETY REGULATIONS Safety regulations This appliance is intended for commercial use only and must not be used for household use. The appliance must only be used for the purpose for which it was intended and designed. The manufacturer is not liable for any damage caused by incorrect operation and improper use.
Page 5 is in the socket, Turn off the appliance before pulling the plug out of the socket. Never carry the appliance by the cord. Do not use any extra devices that are not supplied with the appliance. Only connect the appliance to an electrical outlet with the voltage and frequency mentioned on the appliance label.
Page 6 charcoal cooker, etc.) Keep the appliance away from any hot surfaces and open flames. Always operate the appliance on a level, stable, clean, heat-resistant and dry surface. Danger of injury! Care is needed when operating or cleaning. Wear protective gloves (not supplied) if necessary. Caution! Securely route the power cord if necessary, in order to prevent unintentional tripping over and falling.
Page 7 SPECIFICATION PARAMETERS Parts of description - 6 -...
Page 8 MAIN TECHNICAL PARAMETERS - 7 -...
Page 9 Model IB350CV Input AC120V 60Hz AC230V 50Hz Rated Power 350 W 350 W Tool length 10~20 inch 10~20 inch Min:4000RPM Rotating speed Max:16000 RPM Working noise ≤85dB（A） A Length 373 mm B Diameter Ø 96 mm 10inch: 254 mm 12inch: 305 mm...
Page 10 times. Ensure the power outlet ratings correspond to the specifications on the rating plate. Make sure that the machine is connected to a grounding system if it’s needed. Even if safety systems are installed on the machine, prevent approaching moving parts with hands, and do not touch the machine with wet hands.
Page 11 Safety devices Safety Switch: The safety switch is equipped for IB350CF/IB350CV/IB500LF/IB500LV/ IB750LF/IB750LV, to make sure both hands are away from the blade while starting machine. Overcurrent protection switch (Circuit breaker): This switch is designed to protect the electrical circuit from damage caused by excess current caused by an overload or short circuit.
Page 12 CONTINUOUS OPERATION: Follow above steps 4.4.2.1 to 4.4.2.6 above, then: While the on-off button (No.3) is in the depressed position, press the locking button (No.4). Release the on-off button (No.3), and the appliance will function continuously. To stop the appliance, press the on-off button (No.3) and release it. VARIABLE-SPEED OPERATION Follow above steps 4.4.2.1 to 4.4.2.6, then: Change the speed of the motor by turning the variable speed button...
Page 13 Blender function: For better control, we recommend holding the bender by the handle and the bottom of the motor unit. Furthermore, we recommend tilting the bender slightly to prevent the bell from touching the bottom of the container. Always ensure that the bell is sufficiently immersed to avoid splashing and that the air vents of the motor unit do not come into contact with any liquid.
Page 14 Blender tube and bell cleaning: Place the tube and bell into a suitable container with water and switch on for a few seconds to clean the bell and tube. WARNING: Always dry the blades thoroughly after cleaning to avoid spotting. Never immerse the whisk holder in water, clean it with a slightly damp cloth or sponge.
Page 15 restart the appliance. If it is due to overheating of the machine, release the on-off button (No.3), and then unplug the appliance, wait a few minutes for the motor to cool down and the thermal safety mechanism to be reset, and then restart the appliance.
Page 16 Technical Support and E-Warranty Certificate www.vevor.com/support...
Page 17 Technical Support and E-Warranty Certificate www.vevor.com/support Commercial Blender Manual MODEL: IB350CV We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us.
Page 18 This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.
Page 19 Warning-To reduce the risk of injury, user must read instructions manual carefully. This product is subject to the provision of European Directive 2012/19/EC. The symbol showing a wheelie bin crossed through indicates that the product requires separate refuse collection in the European Union. This applies to the product and all accessories marked with this symbol.
Page 20 SAFETY REGULATIONS Safety regulations This appliance is intended for commercial use only and must not be used for household use. The appliance must only be used for the purpose for which it was intended and designed. The manufacturer is not liable for any damage caused by incorrect operation and improper use.
Page 21 is in the socket, Turn off the appliance before pulling the plug out of the socket. Never carry the appliance by the cord. Do not use any extra devices that are not supplied with the appliance. Only connect the appliance to an electrical outlet with the voltage and frequency mentioned on the appliance label.
Page 22 charcoal cooker, etc.) Keep the appliance away from any hot surfaces and open flames. Always operate the appliance on a level, stable, clean, heat-resistant and dry surface. Danger of injury! Care is needed when operating or cleaning. Wear protective gloves (not supplied) if necessary. Caution! Securely route the power cord if necessary, in order to prevent unintentional tripping over and falling.
Page 23 SPECIFICATION PARAMETERS Parts of description - 6 -...
Page 24 MAIN TECHNICAL PARAMETERS - 7 -...
Page 25 Model IB350CV Input AC120V 60Hz AC230V 50Hz Rated Power 350 W 350 W Tool length 10~20 inch 10~20 inch Min:4000RPM Rotating speed Max:16000 RPM Working noise ≤85dB（A） A Length 373 mm B Diameter Ø 96 mm 10inch: 254 mm 12inch: 305 mm...
Page 26 times. Ensure the power outlet ratings correspond to the specifications on the rating plate. Make sure that the machine is connected to a grounding system if it’s needed. Even if safety systems are installed on the machine, prevent approaching moving parts with hands, and do not touch the machine with wet hands.
Page 27 Safety devices Safety Switch: The safety switch is equipped for IB350CF/IB350CV/IB500LF/IB500LV/ IB750LF/IB750LV, to make sure both hands are away from the blade while starting machine. Overcurrent protection switch (Circuit breaker): This switch is designed to protect the electrical circuit from damage caused by excess current caused by an overload or short circuit.
Page 28 CONTINUOUS OPERATION: Follow above steps 4.4.2.1 to 4.4.2.6 above, then: While the on-off button (No.3) is in the depressed position, press the locking button (No.4). Release the on-off button (No.3), and the appliance will function continuously. To stop the appliance, press the on-off button (No.3) and release it. VARIABLE-SPEED OPERATION Follow above steps 4.4.2.1 to 4.4.2.6, then: Change the speed of the motor by turning the variable speed button...
Page 29 Blender function: For better control, we recommend holding the bender by the handle and the bottom of the motor unit. Furthermore, we recommend tilting the bender slightly to prevent the bell from touching the bottom of the container. Always ensure that the bell is sufficiently immersed to avoid splashing and that the air vents of the motor unit do not come into contact with any liquid.
Page 30 Blender tube and bell cleaning: Place the tube and bell into a suitable container with water and switch on for a few seconds to clean the bell and tube. WARNING: Always dry the blades thoroughly after cleaning to avoid spotting. Never immerse the whisk holder in water, clean it with a slightly damp cloth or sponge.
Page 31 restart the appliance. If it is due to overheating of the machine, release the on-off button (No.3), and then unplug the appliance, wait a few minutes for the motor to cool down and the thermal safety mechanism to be reset, and then restart the appliance.
Page 32 Technical Support and E-Warranty Certificate www.vevor.com/support...
Page 33 Technical Support and E-Warranty Certificate www.vevor.com/support Commercial Blender Manual MODEL: IB350CV We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us.
Page 34 This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.
Page 35 Warning-To reduce the risk of injury, user must read instructions manual carefully. This product is subject to the provision of European Directive 2012/19/EC. The symbol showing a wheelie bin crossed through indicates that the product requires separate refuse collection in the European Union. This applies to the product and all accessories marked with this symbol.
Page 36 SAFETY REGULATIONS Safety regulations This appliance is intended for commercial use only and must not be used for household use. The appliance must only be used for the purpose for which it was intended and designed. The manufacturer is not liable for any damage caused by incorrect operation and improper use.
Page 37 is in the socket, Turn off the appliance before pulling the plug out of the socket. Never carry the appliance by the cord. Do not use any extra devices that are not supplied with the appliance. Only connect the appliance to an electrical outlet with the voltage and frequency mentioned on the appliance label.
Page 38 charcoal cooker, etc.) Keep the appliance away from any hot surfaces and open flames. Always operate the appliance on a level, stable, clean, heat-resistant and dry surface. Danger of injury! Care is needed when operating or cleaning. Wear protective gloves (not supplied) if necessary. Caution! Securely route the power cord if necessary, in order to prevent unintentional tripping over and falling.
Page 39 SPECIFICATION PARAMETERS Parts of description - 6 -...
Page 40 MAIN TECHNICAL PARAMETERS - 7 -...
Page 41 Model IB350CV Input AC120V 60Hz AC230V 50Hz Rated Power 350 W 350 W Tool length 10~20 inch 10~20 inch Min:4000RPM Rotating speed Max:16000 RPM Working noise ≤85dB（A） A Length 373 mm B Diameter Ø 96 mm 10inch: 254 mm 12inch: 305 mm...
Page 42 times. Ensure the power outlet ratings correspond to the specifications on the rating plate. Make sure that the machine is connected to a grounding system if it’s needed. Even if safety systems are installed on the machine, prevent approaching moving parts with hands, and do not touch the machine with wet hands.
Page 43 Safety devices Safety Switch: The safety switch is equipped for IB350CF/IB350CV/IB500LF/IB500LV/ IB750LF/IB750LV, to make sure both hands are away from the blade while starting machine. Overcurrent protection switch (Circuit breaker): This switch is designed to protect the electrical circuit from damage caused by excess current caused by an overload or short circuit.
Page 44 CONTINUOUS OPERATION: Follow above steps 4.4.2.1 to 4.4.2.6 above, then: While the on-off button (No.3) is in the depressed position, press the locking button (No.4). Release the on-off button (No.3), and the appliance will function continuously. To stop the appliance, press the on-off button (No.3) and release it. VARIABLE-SPEED OPERATION Follow above steps 4.4.2.1 to 4.4.2.6, then: Change the speed of the motor by turning the variable speed button...
Page 45 Blender function: For better control, we recommend holding the bender by the handle and the bottom of the motor unit. Furthermore, we recommend tilting the bender slightly to prevent the bell from touching the bottom of the container. Always ensure that the bell is sufficiently immersed to avoid splashing and that the air vents of the motor unit do not come into contact with any liquid.
Page 46 Blender tube and bell cleaning: Place the tube and bell into a suitable container with water and switch on for a few seconds to clean the bell and tube. WARNING: Always dry the blades thoroughly after cleaning to avoid spotting. Never immerse the whisk holder in water, clean it with a slightly damp cloth or sponge.
Page 47 restart the appliance. If it is due to overheating of the machine, release the on-off button (No.3), and then unplug the appliance, wait a few minutes for the motor to cool down and the thermal safety mechanism to be reset, and then restart the appliance.
Page 48 Technical Support and E-Warranty Certificate www.vevor.com/support...
Page 49 Technical Support and E-Warranty Certificate www.vevor.com/support Commercial Blender Manual MODEL: IB350CV We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us.
Page 50 This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.
Page 51 Warning-To reduce the risk of injury, user must read instructions manual carefully. This product is subject to the provision of European Directive 2012/19/EC. The symbol showing a wheelie bin crossed through indicates that the product requires separate refuse collection in the European Union. This applies to the product and all accessories marked with this symbol.
Page 52 SAFETY REGULATIONS Safety regulations This appliance is intended for commercial use only and must not be used for household use. The appliance must only be used for the purpose for which it was intended and designed. The manufacturer is not liable for any damage caused by incorrect operation and improper use.
Page 53 is in the socket, Turn off the appliance before pulling the plug out of the socket. Never carry the appliance by the cord. Do not use any extra devices that are not supplied with the appliance. Only connect the appliance to an electrical outlet with the voltage and frequency mentioned on the appliance label.
Page 54 charcoal cooker, etc.) Keep the appliance away from any hot surfaces and open flames. Always operate the appliance on a level, stable, clean, heat-resistant and dry surface. Danger of injury! Care is needed when operating or cleaning. Wear protective gloves (not supplied) if necessary. Caution! Securely route the power cord if necessary, in order to prevent unintentional tripping over and falling.
Page 55 SPECIFICATION PARAMETERS Parts of description - 6 -...
Page 56 MAIN TECHNICAL PARAMETERS - 7 -...
Page 57 Model IB350CV Input AC120V 60Hz AC230V 50Hz Rated Power 350 W 350 W Tool length 10~20 inch 10~20 inch Min:4000RPM Rotating speed Max:16000 RPM Working noise ≤85dB（A） A Length 373 mm B Diameter Ø 96 mm 10inch: 254 mm 12inch: 305 mm...
Page 58 times. Ensure the power outlet ratings correspond to the specifications on the rating plate. Make sure that the machine is connected to a grounding system if it’s needed. Even if safety systems are installed on the machine, prevent approaching moving parts with hands, and do not touch the machine with wet hands.
Page 59 Safety devices Safety Switch: The safety switch is equipped for IB350CF/IB350CV/IB500LF/IB500LV/ IB750LF/IB750LV, to make sure both hands are away from the blade while starting machine. Overcurrent protection switch (Circuit breaker): This switch is designed to protect the electrical circuit from damage caused by excess current caused by an overload or short circuit.
Page 60 CONTINUOUS OPERATION: Follow above steps 4.4.2.1 to 4.4.2.6 above, then: While the on-off button (No.3) is in the depressed position, press the locking button (No.4). Release the on-off button (No.3), and the appliance will function continuously. To stop the appliance, press the on-off button (No.3) and release it. VARIABLE-SPEED OPERATION Follow above steps 4.4.2.1 to 4.4.2.6, then: Change the speed of the motor by turning the variable speed button...
Page 61 Blender function: For better control, we recommend holding the bender by the handle and the bottom of the motor unit. Furthermore, we recommend tilting the bender slightly to prevent the bell from touching the bottom of the container. Always ensure that the bell is sufficiently immersed to avoid splashing and that the air vents of the motor unit do not come into contact with any liquid.
Page 62 Blender tube and bell cleaning: Place the tube and bell into a suitable container with water and switch on for a few seconds to clean the bell and tube. WARNING: Always dry the blades thoroughly after cleaning to avoid spotting. Never immerse the whisk holder in water, clean it with a slightly damp cloth or sponge.
Page 63 restart the appliance. If it is due to overheating of the machine, release the on-off button (No.3), and then unplug the appliance, wait a few minutes for the motor to cool down and the thermal safety mechanism to be reset, and then restart the appliance.
Page 64 Technical Support and E-Warranty Certificate www.vevor.com/support...
Page 65 Technical Support and E-Warranty Certificate www.vevor.com/support Commercial Blender Manual MODEL: IB350CV We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us.
Page 66 This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.
Page 67 Warning-To reduce the risk of injury, user must read instructions manual carefully. This product is subject to the provision of European Directive 2012/19/EC. The symbol showing a wheelie bin crossed through indicates that the product requires separate refuse collection in the European Union. This applies to the product and all accessories marked with this symbol.
Page 68 SAFETY REGULATIONS Safety regulations This appliance is intended for commercial use only and must not be used for household use. The appliance must only be used for the purpose for which it was intended and designed. The manufacturer is not liable for any damage caused by incorrect operation and improper use.
Page 69 is in the socket, Turn off the appliance before pulling the plug out of the socket. Never carry the appliance by the cord. Do not use any extra devices that are not supplied with the appliance. Only connect the appliance to an electrical outlet with the voltage and frequency mentioned on the appliance label.
Page 70 charcoal cooker, etc.) Keep the appliance away from any hot surfaces and open flames. Always operate the appliance on a level, stable, clean, heat-resistant and dry surface. Danger of injury! Care is needed when operating or cleaning. Wear protective gloves (not supplied) if necessary. Caution! Securely route the power cord if necessary, in order to prevent unintentional tripping over and falling.
Page 71 SPECIFICATION PARAMETERS Parts of description - 6 -...
Page 72 MAIN TECHNICAL PARAMETERS - 7 -...
Page 73 Model IB350CV Input AC120V 60Hz AC230V 50Hz Rated Power 350 W 350 W Tool length 10~20 inch 10~20 inch Min:4000RPM Rotating speed Max:16000 RPM Working noise ≤85dB（A） A Length 373 mm B Diameter Ø 96 mm 10inch: 254 mm 12inch: 305 mm...
Page 74 times. Ensure the power outlet ratings correspond to the specifications on the rating plate. Make sure that the machine is connected to a grounding system if it’s needed. Even if safety systems are installed on the machine, prevent approaching moving parts with hands, and do not touch the machine with wet hands.
Page 75 Safety devices Safety Switch: The safety switch is equipped for IB350CF/IB350CV/IB500LF/IB500LV/ IB750LF/IB750LV, to make sure both hands are away from the blade while starting machine. Overcurrent protection switch (Circuit breaker): This switch is designed to protect the electrical circuit from damage caused by excess current caused by an overload or short circuit.
Page 76 CONTINUOUS OPERATION: Follow above steps 4.4.2.1 to 4.4.2.6 above, then: While the on-off button (No.3) is in the depressed position, press the locking button (No.4). Release the on-off button (No.3), and the appliance will function continuously. To stop the appliance, press the on-off button (No.3) and release it. VARIABLE-SPEED OPERATION Follow above steps 4.4.2.1 to 4.4.2.6, then: Change the speed of the motor by turning the variable speed button...
Page 77 Blender function: For better control, we recommend holding the bender by the handle and the bottom of the motor unit. Furthermore, we recommend tilting the bender slightly to prevent the bell from touching the bottom of the container. Always ensure that the bell is sufficiently immersed to avoid splashing and that the air vents of the motor unit do not come into contact with any liquid.
Page 78 Blender tube and bell cleaning: Place the tube and bell into a suitable container with water and switch on for a few seconds to clean the bell and tube. WARNING: Always dry the blades thoroughly after cleaning to avoid spotting. Never immerse the whisk holder in water, clean it with a slightly damp cloth or sponge.
Page 79 restart the appliance. If it is due to overheating of the machine, release the on-off button (No.3), and then unplug the appliance, wait a few minutes for the motor to cool down and the thermal safety mechanism to be reset, and then restart the appliance.
Page 80 Technical Support and E-Warranty Certificate www.vevor.com/support...
Page 81 Technical Support and E-Warranty Certificate www.vevor.com/support Commercial Blender Manual MODEL: IB350CV We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us.
Page 82 This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.
Page 83 Warning-To reduce the risk of injury, user must read instructions manual carefully. This product is subject to the provision of European Directive 2012/19/EC. The symbol showing a wheelie bin crossed through indicates that the product requires separate refuse collection in the European Union. This applies to the product and all accessories marked with this symbol.
Page 84 SAFETY REGULATIONS Safety regulations This appliance is intended for commercial use only and must not be used for household use. The appliance must only be used for the purpose for which it was intended and designed. The manufacturer is not liable for any damage caused by incorrect operation and improper use.
Page 85 is in the socket, Turn off the appliance before pulling the plug out of the socket. Never carry the appliance by the cord. Do not use any extra devices that are not supplied with the appliance. Only connect the appliance to an electrical outlet with the voltage and frequency mentioned on the appliance label.
Page 86 charcoal cooker, etc.) Keep the appliance away from any hot surfaces and open flames. Always operate the appliance on a level, stable, clean, heat-resistant and dry surface. Danger of injury! Care is needed when operating or cleaning. Wear protective gloves (not supplied) if necessary. Caution! Securely route the power cord if necessary, in order to prevent unintentional tripping over and falling.
Page 87 SPECIFICATION PARAMETERS Parts of description - 6 -...
Page 88 MAIN TECHNICAL PARAMETERS - 7 -...
Page 89 Model IB350CV Input AC120V 60Hz AC230V 50Hz Rated Power 350 W 350 W Tool length 10~20 inch 10~20 inch Min:4000RPM Rotating speed Max:16000 RPM Working noise ≤85dB（A） A Length 373 mm B Diameter Ø 96 mm 10inch: 254 mm 12inch: 305 mm...
Page 90 times. Ensure the power outlet ratings correspond to the specifications on the rating plate. Make sure that the machine is connected to a grounding system if it’s needed. Even if safety systems are installed on the machine, prevent approaching moving parts with hands, and do not touch the machine with wet hands.
Page 91 Safety devices Safety Switch: The safety switch is equipped for IB350CF/IB350CV/IB500LF/IB500LV/ IB750LF/IB750LV, to make sure both hands are away from the blade while starting machine. Overcurrent protection switch (Circuit breaker): This switch is designed to protect the electrical circuit from damage caused by excess current caused by an overload or short circuit.
Page 92 CONTINUOUS OPERATION: Follow above steps 4.4.2.1 to 4.4.2.6 above, then: While the on-off button (No.3) is in the depressed position, press the locking button (No.4). Release the on-off button (No.3), and the appliance will function continuously. To stop the appliance, press the on-off button (No.3) and release it. VARIABLE-SPEED OPERATION Follow above steps 4.4.2.1 to 4.4.2.6, then: Change the speed of the motor by turning the variable speed button...
Page 93 Blender function: For better control, we recommend holding the bender by the handle and the bottom of the motor unit. Furthermore, we recommend tilting the bender slightly to prevent the bell from touching the bottom of the container. Always ensure that the bell is sufficiently immersed to avoid splashing and that the air vents of the motor unit do not come into contact with any liquid.
Page 94 Blender tube and bell cleaning: Place the tube and bell into a suitable container with water and switch on for a few seconds to clean the bell and tube. WARNING: Always dry the blades thoroughly after cleaning to avoid spotting. Never immerse the whisk holder in water, clean it with a slightly damp cloth or sponge.
Page 95 restart the appliance. If it is due to overheating of the machine, release the on-off button (No.3), and then unplug the appliance, wait a few minutes for the motor to cool down and the thermal safety mechanism to be reset, and then restart the appliance.
Page 96 Technical Support and E-Warranty Certificate www.vevor.com/support...
Page 97 Technical Support and E-Warranty Certificate www.vevor.com/support Commercial Blender Manual MODEL: IB350CV We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us.
Page 98 This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.
Page 99 Warning-To reduce the risk of injury, user must read instructions manual carefully. This product is subject to the provision of European Directive 2012/19/EC. The symbol showing a wheelie bin crossed through indicates that the product requires separate refuse collection in the European Union. This applies to the product and all accessories marked with this symbol.
Page 100 SAFETY REGULATIONS Safety regulations This appliance is intended for commercial use only and must not be used for household use. The appliance must only be used for the purpose for which it was intended and designed. The manufacturer is not liable for any damage caused by incorrect operation and improper use.
Page 101 is in the socket, Turn off the appliance before pulling the plug out of the socket. Never carry the appliance by the cord. Do not use any extra devices that are not supplied with the appliance. Only connect the appliance to an electrical outlet with the voltage and frequency mentioned on the appliance label.
Page 102 charcoal cooker, etc.) Keep the appliance away from any hot surfaces and open flames. Always operate the appliance on a level, stable, clean, heat-resistant and dry surface. Danger of injury! Care is needed when operating or cleaning. Wear protective gloves (not supplied) if necessary. Caution! Securely route the power cord if necessary, in order to prevent unintentional tripping over and falling.
Page 103 SPECIFICATION PARAMETERS Parts of description - 6 -...
Page 104 MAIN TECHNICAL PARAMETERS - 7 -...
Page 105 Model IB350CV Input AC120V 60Hz AC230V 50Hz Rated Power 350 W 350 W Tool length 10~20 inch 10~20 inch Min:4000RPM Rotating speed Max:16000 RPM Working noise ≤85dB（A） A Length 373 mm B Diameter Ø 96 mm 10inch: 254 mm 12inch: 305 mm...
Page 106 times. Ensure the power outlet ratings correspond to the specifications on the rating plate. Make sure that the machine is connected to a grounding system if it’s needed. Even if safety systems are installed on the machine, prevent approaching moving parts with hands, and do not touch the machine with wet hands.
Page 107 Safety devices Safety Switch: The safety switch is equipped for IB350CF/IB350CV/IB500LF/IB500LV/ IB750LF/IB750LV, to make sure both hands are away from the blade while starting machine. Overcurrent protection switch (Circuit breaker): This switch is designed to protect the electrical circuit from damage caused by excess current caused by an overload or short circuit.
Page 108 CONTINUOUS OPERATION: Follow above steps 4.4.2.1 to 4.4.2.6 above, then: While the on-off button (No.3) is in the depressed position, press the locking button (No.4). Release the on-off button (No.3), and the appliance will function continuously. To stop the appliance, press the on-off button (No.3) and release it. VARIABLE-SPEED OPERATION Follow above steps 4.4.2.1 to 4.4.2.6, then: Change the speed of the motor by turning the variable speed button...
Page 109 Blender function: For better control, we recommend holding the bender by the handle and the bottom of the motor unit. Furthermore, we recommend tilting the bender slightly to prevent the bell from touching the bottom of the container. Always ensure that the bell is sufficiently immersed to avoid splashing and that the air vents of the motor unit do not come into contact with any liquid.
Page 110 Blender tube and bell cleaning: Place the tube and bell into a suitable container with water and switch on for a few seconds to clean the bell and tube. WARNING: Always dry the blades thoroughly after cleaning to avoid spotting. Never immerse the whisk holder in water, clean it with a slightly damp cloth or sponge.
Page 111 restart the appliance. If it is due to overheating of the machine, release the on-off button (No.3), and then unplug the appliance, wait a few minutes for the motor to cool down and the thermal safety mechanism to be reset, and then restart the appliance.
Page 112 Technical Support and E-Warranty Certificate www.vevor.com/support...
Page 113 Technical Support and E-Warranty Certificate www.vevor.com/support Commercial Blender Manual MODEL: IB350CV We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us.
Page 114 This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.
Page 115 Warning-To reduce the risk of injury, user must read instructions manual carefully. This product is subject to the provision of European Directive 2012/19/EC. The symbol showing a wheelie bin crossed through indicates that the product requires separate refuse collection in the European Union. This applies to the product and all accessories marked with this symbol.
Page 116 SAFETY REGULATIONS Safety regulations This appliance is intended for commercial use only and must not be used for household use. The appliance must only be used for the purpose for which it was intended and designed. The manufacturer is not liable for any damage caused by incorrect operation and improper use.
Page 117 is in the socket, Turn off the appliance before pulling the plug out of the socket. Never carry the appliance by the cord. Do not use any extra devices that are not supplied with the appliance. Only connect the appliance to an electrical outlet with the voltage and frequency mentioned on the appliance label.
Page 118 charcoal cooker, etc.) Keep the appliance away from any hot surfaces and open flames. Always operate the appliance on a level, stable, clean, heat-resistant and dry surface. Danger of injury! Care is needed when operating or cleaning. Wear protective gloves (not supplied) if necessary. Caution! Securely route the power cord if necessary, in order to prevent unintentional tripping over and falling.
Page 119 SPECIFICATION PARAMETERS Parts of description - 6 -...
Page 120 MAIN TECHNICAL PARAMETERS - 7 -...
Page 121 Model IB350CV Input AC120V 60Hz AC230V 50Hz Rated Power 350 W 350 W Tool length 10~20 inch 10~20 inch Min:4000RPM Rotating speed Max:16000 RPM Working noise ≤85dB（A） A Length 373 mm B Diameter Ø 96 mm 10inch: 254 mm 12inch: 305 mm...
Page 122 times. Ensure the power outlet ratings correspond to the specifications on the rating plate. Make sure that the machine is connected to a grounding system if it’s needed. Even if safety systems are installed on the machine, prevent approaching moving parts with hands, and do not touch the machine with wet hands.
Page 123 Safety devices Safety Switch: The safety switch is equipped for IB350CF/IB350CV/IB500LF/IB500LV/ IB750LF/IB750LV, to make sure both hands are away from the blade while starting machine. Overcurrent protection switch (Circuit breaker): This switch is designed to protect the electrical circuit from damage caused by excess current caused by an overload or short circuit.
Page 124 CONTINUOUS OPERATION: Follow above steps 4.4.2.1 to 4.4.2.6 above, then: While the on-off button (No.3) is in the depressed position, press the locking button (No.4). Release the on-off button (No.3), and the appliance will function continuously. To stop the appliance, press the on-off button (No.3) and release it. VARIABLE-SPEED OPERATION Follow above steps 4.4.2.1 to 4.4.2.6, then: Change the speed of the motor by turning the variable speed button...
Page 125 Blender function: For better control, we recommend holding the bender by the handle and the bottom of the motor unit. Furthermore, we recommend tilting the bender slightly to prevent the bell from touching the bottom of the container. Always ensure that the bell is sufficiently immersed to avoid splashing and that the air vents of the motor unit do not come into contact with any liquid.
Page 126 Blender tube and bell cleaning: Place the tube and bell into a suitable container with water and switch on for a few seconds to clean the bell and tube. WARNING: Always dry the blades thoroughly after cleaning to avoid spotting. Never immerse the whisk holder in water, clean it with a slightly damp cloth or sponge.
Page 127 restart the appliance. If it is due to overheating of the machine, release the on-off button (No.3), and then unplug the appliance, wait a few minutes for the motor to cool down and the thermal safety mechanism to be reset, and then restart the appliance.
Page 128 Technical Support and E-Warranty Certificate www.vevor.com/support...

VEVOR IB350CV Manual

Quick Links

Need help?

Questions and answers

Related Manuals for VEVOR IB350CV

Summary of Contents for VEVOR IB350CV