Hunter 20715 Owner's Manual And Installation Manual

Hunter 20715 Owner's Manual And Installation Manual

Type 2 series
Hide thumbs Also See for 20715:

Advertisement

For Your Records and
Warranty Assistance
For reference, also attach your receipt or a copy
of your receipt to the manual.
__________________________________________
Model Name
__________________________________________
Model No.
__________________________________________
Date Purchased
__________________________________________
Where Purchased
Form# 45028-01
20110215
©2011 Hunter Fan Co.
Type 2 Models
Type 2 Models
Type 2 Models
Owner's Guide and Installation Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 20715 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Hunter 20715

  • Page 1 Warranty Assistance For reference, also attach your receipt or a copy of your receipt to the manual. Owner’s Guide and Installation Manual __________________________________________ Model Name __________________________________________ Model No. __________________________________________ Date Purchased __________________________________________ Where Purchased Form# 45028-01 20110215 ©2011 Hunter Fan Co.
  • Page 2: Table Of Contents

    • To reduce the risk of fire, electrical shock, or motor damage, do not 9 • Troubleshooting....16 use a solid-state speed control with this fan. Use only Hunter speed controls.
  • Page 3 If you want to use an existing fan site, complete the following checklist to System determine if the site is acceptable and safe for your new Hunter fan. If you cannot check off every item, prepare a new fan site as described on this page.
  • Page 4 ANSI/NFPA 70. If your ceiling fan, go to your fan manual and continue with Section 2 • Installing the you are unfamiliar with wiring, use a Ceiling Plate. qualified electrician. 45028-01 • 02/15/11 • Hunter Fan Company...
  • Page 5 Support Brace Hunter’s patented 3-position mounting system provides you maximum installation flexibility and ease. You can install your Hunter fan in one of three ways, depending on ceiling height and your preference: Low Profile, Standard, or Angled mounting. The steps in this manual include Ceiling instructions for all three Installer’s Choice mounting methods.
  • Page 6: Getting Ready

    • Drill holes for and install wood screws. • Identify and connect electrical wires. • Lift 40 pounds. If you need help installing the fan, your Hunter fan dealer can direct you to a licensed installer or electrician. Gathering the Tools You will need the following tools for installing the fan: •...
  • Page 7: Installing The Hanger Bracket

    Tighten the screws into the 9/64” pilot holes; do not use lubricants on the screws. Do not over tighten. Flat Washer Steps 2-2 – 2-4 Ceiling Peak Ceiling Peak Large Large Opening Opening 3” Screw LEFT RIGHT Step 2-3 (Angled Ceiling Only) 45028-01 • 02/15/11 • Hunter Fan Company...
  • Page 8: Assembling And Hanging The Fan

    (Rotate the fan until you hear the notch pop into place.) Steps 3-4 – 3-5 Go to 4 • Wiring the Fan. WARNING: Fan may fall if not assembled as directed in these installation instructions. 45028-01 • 02/15/11 • Hunter Fan Company...
  • Page 9 WARNING: Fan may fall if not assembled as directed in these installation instructions. Steps 3-8 – 3-9 Low Profile Washer Step 3-7 (Detail) Low Profile Washer Adapter Canopy Trim Ring #8-32 x 3/4” Screw Step 3-10 45028-01 • 02/15/11 • Hunter Fan Company...
  • Page 10: Wiring The Fan

    4-7. Spread the wires apart, with the grounded wires on one side of the outlet box and the ungrounded wires on the other side of the outlet box. 45028-01 • 02/15/11 • Hunter Fan Company...
  • Page 11: Installing The Canopy And Canopy Trim

    5-6. Twist canopy trim ring clockwise to secure the canopy. Should you need to remove the canopy trim ring, follow these steps: 1. Twist canopy trim ring counter clockwise until it releases from canopy. Step 5-3 Step 5-4 Canopy Step 5-5 Screw 45028-01 • 02/15/11 • Hunter Fan Company...
  • Page 12: Assembling The Blades

    6 • Assembling the Blades Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan). 6-1. Your fan may include blade grommets. If your fan has grommets, Step 6-1 (Detail) insert them by hand into the holes on the blades.
  • Page 13: Completing Your Installation With A Multi Staked Light Fixture

    Align the side screw holes in the upper and lower switch housings. Attach the lower switch housing to the upper switch housing with three #6-32 x 3/8” housing assembly screws. Housing Plug Assembly Screw Connector Detail Steps 7-4– 7-6 Lower Switch Housing 45028-01 • 02/15/11 • Hunter Fan Company...
  • Page 14 Exceeding the wattage limit marked on the MAX wattage sticker affixed to the light socket(s) may result in fire hazard or improper operation. 45028-01 • 02/15/11 • Hunter Fan Company...
  • Page 15: Fan

    To Change Airflow Direction Turn the fan off and let it come to a complete stop. Slide the reversing switch on the fan to the opposite position. Restart fan. Reversing Switch 45028-01 • 02/15/11 • Hunter Fan Company...
  • Page 16: Troubleshooting

    If you need parts or service assistance, please call 888-830-1326 (In Canada, call 866-268-1936) or visit us at our Web site at http://www.hunterfan.com. Hunter Fan Company 7130 Goodlett Farms Parkway #400 Memphis, Tennessee 38016 45028-01 • 02/15/11 • Hunter Fan Company...

Table of Contents