Table of Contents
Advertisement
Quick Links
For Your Records and
Warranty Assistance
For reference, also attach your receipt or a copy
of your receipt to the manual.
X-Board
__________________________________________
Model Name
__________________________________________
20727
Model No.
__________________________________________
Date Purchased
__________________________________________
Where Purchased
Form# 42663-01
20120524
©2012 Hunter Fan Co.
Model Type 2
Model Type 2
Model Type 2
Owner's Guide and Installation Manual
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Hunter Type 2 X-Board 20727
Summary of Contents for Hunter Type 2 X-Board 20727
- Page 1 For reference, also attach your receipt or a copy of your receipt to the manual. Owner’s Guide and Installation Manual X-Board __________________________________________ Model Name __________________________________________ 20727 Model No. __________________________________________ Date Purchased __________________________________________ Where Purchased Form# 42663-01 20120524 ©2012 Hunter Fan Co.
-
Page 2: Table Of Contents
Fan ......13 use a solid-state speed control with this fan. Use only Hunter speed 9 •... - Page 3 Support Brace Hunter’s patented 2-position mounting system provides you maximum installation flexibility and ease. You can install your Hunter fan in one of two ways, depending on ceiling height and your preference: Standard or Angled mounting. The steps in this manual include instructions for Ceiling both Installer’s Choice mounting methods.
-
Page 4: Getting Ready
• Drill holes for and install wood screws. • Identify and connect electrical wires. • Lift 40 pounds. If you need help installing the fan, your Hunter fan dealer can direct you to a licensed installer or electrician. Gathering the Tools You will need the following tools for installing the fan: •... -
Page 5: Installing The Ceiling Plate
Tighten the screws into the 9/64” pilot holes; do not use lubricants on the screws. Do not over tighten. Ceiling Plate Flat Washer 3” Wood Steps 2-3 – 2-6 Screw 42663-01 • 05/24/12 • Hunter Fan Company... -
Page 6: Assembling And Hanging The Fan
Once assembled, do not remove the downrod. 3-4. Raise the fan and align the slots in the canopy with the hooks on the ceiling plate. 3-5. Place the slots over the hooks to hang the fan. 42663-01 • 05/24/12 • Hunter Fan Company... -
Page 7: Wiring The Fan
4-7. Spread the wires apart, with the grounded wires on one side of the outlet box and the ungrounded wires on the other side of the outlet box. 42663-01 • 05/24/12 • Hunter Fan Company... -
Page 8: Installing The Canopy And Canopy
Note: Should you need to remove the trim ring, press firmly on Canopy opposite sides of the trim ring directly above the groove in the Trim hanger ball. The tabs will flex out releasing the canopy trim ring. Ring Canopy Screw 42663-01 • 05/24/12 • Hunter Fan Company... -
Page 9: Assembling The Blades
Insert the second blade mounting screw, then securely tighten both mounting screws. Blade Assembly Screws Step 6-1 Step 6-2 Blade Mounting Screw Blade Mounting Screws Acorn Nuts Acorn Nut 42663-01 • 05/24/12 • Hunter Fan Company... -
Page 10: Completing Your Installation With A Bowl Light Fixture
7 • Completing Your Installation With a Bowl Light Fixture Your Hunter fan comes with an integrated light fixture assembly. WARNING: Use only the light fixture supplied with this fan model. 7-1. To attach the upper switch housing, partially install two housing... - Page 11 CAUTION: Make sure the light kit is securely attached to the upper switch housing. Failure to properly attach and tighten all three assembly screws could result in the switch housing and light fixture falling. Plug Connector Detail Assembly Screw 42663-01 • 05/24/12 • Hunter Fan Company...
- Page 12 190 Watts. Exceeding that limit or the marked limit on this product may result in fire hazard or Breakaway improper operation. Connector 42663-01 • 05/24/12 • Hunter Fan Company...
-
Page 13: Fan
Turn the fan off and let it come to a complete stop. Remove the glass bowl. Slide the reversing switch on the fan to the opposite position. Reinstall the glass bowl. Restart the fan. Reversing Switch 42663-01 • 05/24/12 • Hunter Fan Company... -
Page 14: Troubleshooting
If you need parts or service assistance, please call 888-830-1326 or visit us at our website at http://www.HunterFan.com. Hunter Fan Company 7130 Goodlett Farms Parkway, Suite 400 Memphis, Tennessee 38016 42663-01 • 05/24/12 • Hunter Fan Company...
Need help?
Do you have a question about the Type 2 X-Board 20727 and is the answer not in the manual?
Questions and answers