Hunter 20531 Owner's Manual And Installation Manual page 14

7 • Completing Your Installation With or Without a Bowl Light Fixture (Continued)
Installing the Glass Bowl
7-8 . First install B10 candelabra bulbs (60 Watt Maximum) into the
sockets .
7-9 . Attach the extra pull chain (included) to the fan pull chain using
the breakaway connector . (You may find the breakaway connector
on the end of the extra chain . )
7-10 . Thread the fan pull chain through the hole in the metal disk . Then,
thread the fan pull chain through the hole in the center of the glass
bowl .
7-11 . Thread the light pull chain through the hole in the center of the
glass bowl . Then, Thread the light pull chain throught the hole in
the center of the cover plate .
7-12 . Thread the fan pull chain through the grommet hole in the side of
the cover plate .
7-13 . Place the cover plate up against the
glass bowl . Align the holes in the cover
plate and glass bowl .
7-14 . Thread the light pull chain through
the finial and screw the finial onto the
threaded rod end until tight .
Breakaway
Connector
14
42450-01 • 11/18/10 • Hunter Fan Company
Light Bulbs
(B10
Candelabra
Base 60 Watt
Maximum)
Metal Rod
Metal Disk
Glass Bowl
Cover Plate
Finial