Page 3
Fig. B XXXX XX XX Fig. D Fig. C Fig. E Fig. F Fig. G Fig. H...
Page 4
Fig. J Fig. I Fig. K Fig. L Fig. O Fig. M Fig. N...
Page 5
Congratulations! with: 2006/42/EC, EN62841‑1:2015 +A11:2022, EN ISO 12100:2010. You have chosen a STANLEY FATMAX tool. Years of experience, These products also comply with Directive 2014/30/EU and thorough product development and innovation make STANLEY 2011/65/EU. For more information, please contact us at the FATMAX one of the most reliable partners for consumer power following address or refer to the back of the manual.
English earthed (grounded) power tools. Unmodified plugs and storing power tools. Such preventive safety measures reduce the matching outlets will reduce risk of electric shock. risk of starting the power tool accidentally. b ) Avoid body contact with earthed or grounded surfaces, d ) Store idle power tools out of the reach of children and such as pipes, radiators, ranges and refrigerators.
) Always use two hands when operating extended‑reach CAUTION: Burn hazard. To reduce the risk of injury, charge pruner shears. Holding the machine with both hands avoids loss only STANLEY FATMAX rechargeable batteries. Other types of of control. batteries may burst, causing personal injury and damage.
Wall Mounting normal and does not indicate a problem. Some STANLEY FATMAX chargers are designed to be wall nOTE: The charger will not charge a battery if the cell mountable or to sit upright on a table or work surface. If wall temperature is below approximately 10 °C or above 40 °C.
100 Watt • Charge the battery packs only in STANLEY FATMAX chargers. Hours (Wh) will require being shipped as fully regulated Class 9. All lithium‑ion batteries have the Wh rating marked on the pack.
28 consists of a 4‑digit year followed by a 2‑digit week and is extended by a 2‑digit factory code. Charge STANLEY FATMAX battery packs only with designated STANLEY FATMAX chargers. Charging Description (Fig. A) battery packs other than the designated STANLEY WARNING: Never modify the power tool or any part of it.
Fuel Gauge Battery Packs (Fig. H) completely threaded on and that the red threads are no longer Some STANLEY FATMAX battery packs include a fuel gauge, visible. Not threading the sleeve completely on could result in the which consists of three green LED lights that indicate the level folding assembly becoming disconnected creating a hazardous of charge remaining in the battery pack.
Page 12
English Proper Hand Position (Fig. I) when the trigger switch is released. Never adjust the cutting blade when the motor is operating or the battery is attached. 8 WARNING: To reduce the risk of serious personal injury, WARNINGS: ALWAYS use proper hand position as shown. •...
Page 13
WARNING: Since accessories, other than those offered by 8. Use the blade lock knob 11 to fully tighten the cutting STANLEY FATMAX, have not been tested with this product, use of blade screw 23 such accessories with this tool could be hazardous. To reduce the risk of injury, only STANLEY FATMAX‑recommended accessories...
English Protecting the Environment Products/batteries are recyclable, but if marked with the crossed‑out bin, they must not be disposed of with normal household waste. Run the batteries down completely and separate them, and separate any light sources from the product if possible. It is the user's responsibility to delete personal data from the product.
Page 16
Stanley Fat Max Tel. 031‑68 61 00 Box 94, 431 22 Mölndal 031‑68 60 08 Türkiye Stanley Black & Decker Turkey Alet Üretim Tic. Ltd.Şti. Puh. +90 216 665 2900 нчerenköy Mahallesi Umut Sokak. Faks +90 216 665 2901 No: 10‑‑12 / 82‑‑83‑‑84 Kat: 19 https://tr.stanleytools.global...
Need help?
Do you have a question about the FATMAX SFMCPP632 and is the answer not in the manual?
Questions and answers