Walrus Audio Canvas Rehearsal Manual

Thanks for choosing the Canvas Rehearsal as your all-in-one rehearsal
utility. Simply connect it to the end of your pedal chain, plug in some
headphones, and you're ready to rehearse!
To get started, simply set your tempo by tapping it
in or use the encoder to dial in a specifi c BPM. Press
the Start/Stop switch to turn the metronome on
and off.
Want to practice along with a song? Use the
1/8" Auxiliary input or pair the Rehearsal with a
Bluetooth enabled device to play along with a
track.
Use the Guitar, Click, and AUX knobs to mix levels to
taste. The Headphone volume knob will then adjust
the overall mix.
The use of an isolated power supply is recommended for powering all
Walrus Audio Pedals. Daisy chain power supplies are not recommended.
View the full manual,
register your pedal,
watch videos, and
more by scanning
the QR code on the
reverse side.
9 volt DC, Center Neg.
300mA min*