Walrus Audio 385 Overdrive MKII Manual

The 385 Overdrive MKII is inspired by the vintage Bell and Howell
that guitarists have modified and used as guitar amps for its unique breakup and tone. The 385
captures the amp's charm by running internally at 18 volts* to help nail the same dynamic feel
and response to pick attack the amp has. Dig in and discover all the nuances the MKII has to offer.
And yes, the dynamics of the 385 sound great on bass too!
*Only use a 9 volt DC, Center Negative, 100mA to power the pedal.
The use of an isolated power supply is recommended for powering all Walrus Audio Pedals.
Email help@walrusaudio.com to talk with a real live human about your Walrus gear!
Bypass: Soft-touch, relay true bypass. Press the switch to
engage/disengage the pedal. LED indicates whether the
circuit is engaged or not.
A/B: The A/B switch allows you to have two separate volume
and gain settings. Use it like a preset to change the volume
and/or gain for specific parts! Press to swap between using
either A (White) or B (Red) Volume and Gain controls. LED
indicates which controls are being used - White for A, Red
for B.
Volume A: Controls the overall volume in the A setting. Turn
clockwise for more volume, and counter-clockwise for less
volume.
Gain A: Controls the overall gain in the A setting. Turn
clockwise for more gain, counterclockwise for less gain.
Daisy chain power supplies are not recommended.
Got questions or need a repair?
This product comes with a limited lifetime warranty.
Click Here
for more info.
385 Filmosound projector
® ™