Seagate BlackArmor NAS 110 User Manual page 9

• BlackArmor
operating systems to your BlackArmor NAS 110 server. You can also restore your system
and data using this software. See the BlackArmor Backup User Guide for details.
Features of the BlackArmor NAS 110 Server
The BlackArmor NAS 110 server includes:
• One Serial ATA (SATA) disk drive.
• One Ethernet, or LAN, port that let you access the server from your local network or over
the Internet.
• Two USB ports:
• The rear port lets you back up data directly to or from a portable USB drive or connect
a USB printer that everyone on your local network can use, or connect an
Uninterruptable Power Supply (UPS).
• The front USB port on the BlackArmor server is used for the OneTouch™ backup
feature. To use this backup feature, connect a USB flash drive to the front USB port,
and then press the OneTouch button when the button lights. The contents from the
USB device is copied to a predefined folder on the server. This folder (named
"OneTouch Backup") is stored in the Public share. See "Backing up Using the Front
USB Port" on page 49.
• LEDs representing the ports, disk drive, and server that indicate activity and status. See
page 39.
• A Reset button (on the bottom of the server) that lets you reset your BlackArmor NAS 110
server user name and password to their factory default settings.
BlackArmor® NAS 110 User Guide
Backup—Software that helps you back up files, applications, and even
About the BlackArmor NAS 110 Server
10