Operating The Remote Control And Mounting The Holder; Fan - Hunter 20171 Owner's Manual And Installation Manual

10 • Operating the Remote Control and Mounting the Holder
10-1. Do not install the battery into the remote control until after you
set the jumpers.
10-2. The remote transmitter has individual buttons for turning the fan
off and on and controlling the light and fan speed.
10-3. For best operation, start the fan by pressing high, then select your
desired speed.
10-4. The light button turns the light on to full brightness. To dim the
light, hold the light button down until you reach your desired
brightness. Push the light button again to turn off the light.
10-5. The reversing switch reverses the direction of the fan.
10-6. Press the OFF button to turn the fan off.
10-7. When necessary, replace the battery with a 12-volt type 23A,
MN-21 battery or equivalent. Please contact your local battery
recycling center for proper battery disposal information.
10-8. You can mount the remote holder to any toggle switch plate with
the screws already in the switch plate. Or, you can simply mount
the remote holder on the wall.
16
42683-01 • 09/11/09 • Hunter Fan Company
Reversing Switch
Fan Speed
High
Fan Speed
Low
Steps 10-1 – 10-5
Step 10-7
Fan Speed
Medium
Fan Off
Fan Light
Step 10-6