Operating The Remote Control And Mounting The Holder - Hunter Type 2 Owners And Installation Manual

10 • Operating the Remote Control and Mounting the Holder
10-1. The remote has individual buttons for setting the fan
speed and light. Refer to the figure on the right.
Note: For best operation, start the fan by pressing high, then
select your desired speed.
10-2. The light button turns on the light. Push the light button
again to turn off the light.
10-3. When necessary, replace the battery with a 12-volt
alkaline battery.
10-4. You can mount the remote holder to any toggle switch
plate with the screws already in the switch plate. Or, you
can simply mount the remote holder on the wall.
17
42458-01 • 05/16/11 • Hunter Fan Company
Fan Off
Fan Speed
Low
Step 10-4
Fan Speed
Medium
Fan Speed
High
Fan Light