Assembling The Blades - Hunter 20171 Owner's Manual And Installation Manual

Hunter fans use several styles of fan blade irons (brackets that hold the
blade to the fan).
8-1. Install the grommets into the blades by hand.
8-2. Place each blade between a blade iron and medallion. Install three
blade assembly screws to attach the medallion to the blade iron.
Repeat for all blades.
8-3. For each blade, insert one blade iron armature screw through the
blade iron, and attach lightly to the fan. Insert the second blade
iron armature screw, then securely tighten both screws.
Blade Iron
Armature
Screw
8 • Assembling the Blades
Blade Assembly
Screw
12
42683-01 • 09/11/09 • Hunter Fan Company
Step 8-1 (Detail)
Grommet
Steps 8-2 – 8-4