Go Power EMBER MPPT Quick Reference

Ember Quick Reference: Go Power MPPT Remote System Settings
Content included in this reference guide can be found in the
Display Manual; this manual is available on our website at
Button Functions:
Long press [ENTER] button to go to the system setting interface
Short press [BACK] button to quit setting interface and go to the main interface
Short press [DOWN] button to move down by one setting
Short press [UP] button to move up by one setting
Press [ENTER] on a setting to edit and use [DOWN] and [UP] to change value.
Press [ENTER] to lock the setting in and [BACK] to cancel the setting.
Ember's Recommended System Settings:
Note: Parameters are set for Lithium 100Ah battery.
IMPORTANT: We use only 1 bank of batteries. Settings should only be performed to
B1 in the system settings, Never B2!
REV: 07.24.2023
Go Power Remote
Resources | Ember
Page 1 Go Power MPPT Remote Settings
Document # TD-23-06
RV.