1. Manuals
  2. Brands
  3. TRAK RACER Manuals
  4. Switch
  5. TR120S
  6. Assembly manual

TRAK RACER TR120S Assembly Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
TR120S Simulator
Assembly Guide
IMPORTANT: Different regions may have different models. Please ensure
the part number below matches that on your product's box.
TR120S
Published 2024-9-10
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TR120S and is the answer not in the manual?

Questions and answers

Related Manuals for TRAK RACER TR120S

Summary of Contents for TRAK RACER TR120S

  • Page 1 TR120S Simulator Assembly Guide IMPORTANT: Different regions may have different models. Please ensure the part number below matches that on your product's box. TR120S Published 2024-9-10...

  • Page 2: Table Of Contents

    TABLE OF CONTENTS Symbol Legend Part List Assembly Notes TR120 Assembly Instructions Stabilizing Feet Option Adjustable Recliner Seat Bracket (TR-RSB4) Non-Adjustable Recliner Seat Bracket (TR-RSB-CH) GT/Rally Seat Assembly (SA09 / SA10) GT/Rally Seat Assembly (SA11 / SA12 / SA13) TRX Seat Assembly with Adjustable Bracket (TRX-SB) Pedal Option 1 Pedal Option 2 Pedal Option 3...
  • Page 3 IMPORTANT: Since there are different versions of each product based on your region, please make sure you are using the correct set of instructions. The part number below should match the one on your box. IMPORTANT: Due to the nature of cut aluminum profiles, some metal shavings may remain despite our thorough QA cleaning process.
  • Page 4 Red Profile Strip Red Profile Strip Red Profile Strip PS-780-R PS-500-R PS-460-R FR-01 tooltip tooltip tooltip Seat Slider Middle Connector Plate Middle Connector Part Wheel Mount N SS-01 MC-S WM-TR1-FN tooltip Wheel Mount Plate Wheel Side Plate TRAK RACER Sticker WM-TR1-PP WM-TR1-WP...
  • Page 5 PART LISTS tooltip tooltip tooltip tooltip M8x20mm Washer (Lock), M8 Ball Bearing Nut Ball Bearing Nut, M6 Ball Bearing Nut Ball Bearing Nut, M8 Washer (Flat) NS-M6 NS-M8 NS-M8 WF-M8-20 WL-M8 tooltip tooltip M6X12mm M8X14mm M8X16mm M8X20mm Screw (Flat) Screw (Flat) Hex Screw Hex Screw SF-M8-16...
  • Page 6 NOTE TOP SIDE BACK SIDE FRONTSIDE OUTSIDE INSTALLATION ORDER FOR SCREWS & WASHERS HOW TO MEASURE SCREWS ① SCREW ② LOCK WASHER ③ WASHER (IF APPLICABLE) FLAT SCREW HEX SCREW BUTTON SCREW...
  • Page 7 NOTE BS-40...
  • Page 8 NOTE NS-M8 & NS-M6 Slide T-Nuts into the ends of the profiles. Some must be added early, so follow the steps in this manual carefully. If you miss one, tilt it in from the outer edge. Use the Allen key to push it into place, ensuring the hole lines up.
  • Page 9 BC-40 SF-M8-16 NS-M8 TR-8040-460 tooltip tooltip tooltip 460mm M8x16mm tooltip SS-01 SH-M8-14 NS-M8 tooltip tooltip M8x14mm tooltip tooltip...
  • Page 10 tooltip SF-M8-16 NS-M8 TR-8120-560 tooltip 60mm M8x16mm ltip tooltip tooltip SF-M6-16 NS-M6 tooltip tooltip M6x16mm tooltip tooltip...
  • Page 11 SF-M8-16 NS-M8 BC-40 TR-8120-500 tooltip tooltip tooltip 500mm M8x16mm tooltip SH-M8-20 NS-M8 FR-01 WF-M8-20 tooltip tooltip tooltip M8x20mm M8x20mm tooltip...
  • Page 12 SH-M8-20 NS-M8 FR-01 WF-M8-20 TR-8120-780 tooltip tooltip 780mm M8x20mm M8x20mm tooltip tooltip MC-S SF-M8-16 NS-M8 tooltip tooltip tooltip M8x16mm tooltip tooltip Attach parts from step 6 to step 7.
  • Page 13 SH-M8-35 WL-M8 tooltip tooltip M8x35mm tooltip tooltip SF-M8-16 NS-M8 tooltip tooltip M8x16mm tooltip Attach parts from step 4 to step 9. tooltip...
  • Page 14 SF-M8-16 tooltip BC-160 M8x16mm tooltip tooltip SF-M8-16 NS-M8 BC-160 TR-8120-780 tooltip 780mm M8x16mm tooltip tooltip...
  • Page 15 tooltip SF-M8-16 NS-M8 tooltip M8x16mm tooltip tooltip Attach parts from step 11 to step 12. SF-M8-20 tooltip tooltip tooltip M8x20mm tooltip...
  • Page 16 tooltip SF-M8-20 WM-TR1-PP TR-8120-180 tooltip tooltip 180mm M8x20mm tooltip SF-M8-20 tooltip tooltip M8x20mm tooltip...
  • Page 17 SH-M8-25 Note: Thread screws just WM-TR1-FN tooltip enough to hold WM-TR1- FN in place so screws do M8x25mm not protrude past WM-TR 1-FN plate. tooltip tooltip tooltip SH-M8-25 WF-M8-20 WL-M8 NS-M8 tooltip M8x25mm M6x20mm tooltip tooltip NOTE: Adjust position after wheelbase and seat installation Attach parts from step 14 to step 17.
  • Page 18 EC-80 tooltip EC-40 tooltip tooltip tooltip tooltip PS-460-R PS-500-R PS-780-R 460mm 500mm 780mm tooltip tooltip tooltip tooltip...
  • Page 19 Stabilizing Feet Option tooltip PART LISTS tooltip tooltip M8x20mm M8x25mm Hex Screw Washer (Lock), M8 Ball Bearing Nut Ball Bearing Nut, M8 Washer (Flat) SH-M8-25 NS-M8 NS-M8 WF-M8-20 WL-M8 tooltip Feet Leg Adjustable Flange Nut, M10 Nut, M10 Feet Plate NF-M10 NL-M10 BF-01...
  • Page 20 Step 7 SH-M8-25 BF-01 NS-M8 WF-M8-20 WL-M8 tooltip tooltip M8x25mm M8x20mm tooltip tooltip FA-01 NL-M8 NF-M8 tooltip...
  • Page 21 Adjustable Recliner Seat Bracket TR-RSB4 Published 2024-10-5...
  • Page 22 Screw Note: Screws supplied with seat...
  • Page 23 Screw SH-M8-20 WF-M8-20 SB-03 M8x20mm M8x20mm Note: Screws supplied with seat & SB-03...
  • Page 24 SH-M8-20 WF-M8-20 NL-M8 M8x20mm M8x20mm Note: Slide the slider all the way back to install screws and nuts. Then slide all the way forward and repeat for front screws and nuts.
  • Page 25 Non-Adjustable Recline Seat Brackets Assembly Guide TR-RSB-CH Published 2024-10-5...
  • Page 26 SH-M8-16 WF-M8-20 SB-03 M8x16mm M8x20mm Note: Screws supplied with seat & SB-03 tooltip tooltip...
  • Page 27 SH-M8-16 WF-M8-20 M8x16mm M8x20mm tooltip tooltip...

  • Page 28: Gt/Rally Seat Assembly (Sa09 / Sa10)

    GT/Rally Seat Assembly SA-09 and SA-10 Published 2024-10-5...
  • Page 29 SH-M8-16 WF-M8-20 WL-M8 M8x16mm M8x20mm SH-M8-16 WF-M8-20 NL-M8 M8x16mm M8x20mm Slide the slider all the way back to install screws and nuts. Then slide all the way forward and repeat for front screws and nuts.

  • Page 30: Gt/Rally Seat Assembly (Sa11 / Sa12 / Sa13)

    GT/Rally Seat Assembly SA-11/SA-12/SA-13 Published 2024-10-5...
  • Page 31 SF-M6-12 WF-M8-20 Long Nut tooltip tooltip M6x12mm M8x20mm tooltip tooltip...
  • Page 32 SH-M8-16 WF-M8-20 WL-M8 M8x16mm M8x20mm tooltip tooltip SH-M8-16 WF-M8-20 WL-M8 M8x16mm M8x20mm...

  • Page 33: Trx Seat Assembly With Adjustable Bracket (Trx-Sb)

    TRX Seat Assembly With Adjustable Bracket TRX-SB Published 2024-10-5...
  • Page 34 SH-M8-16 WF-M8-20 SB-P SB-L SB-R tooltip tooltip tooltip M8x16mm M8x20mm tooltip tooltip SR-M8-20 WF-M8-20 tooltip M8x20mm M8x20mm tooltip...
  • Page 35 SH-M8-16 WF-M8-20 WL-M8 M8x16mm M8x20mm tooltip tooltip...

  • Page 36: Pedal Option 1

    Pedal Option 1 NOTE: Hardware to attach pedals to plate not included. Please use hardware included with your pedal set. PART LISTS BOX #: TR80-NEWPB M8x20mm M8x20mm M8x25mm Hex Screw Hex Screw Washer (Lock), M8 Washer (Flat) SH-M8-20 SH-M8-25 WF-M8-20 WL-M8 tooltip tooltip...
  • Page 37 SL-M8-25 NS-M8 WF-M8-20 WL-M8 PP-NP M8x25mm M8x20mm NOTE: Adjust position after pedal and seat installation. SF-M8-20 NF-M8 PP-NP-LB M8x20mm...
  • Page 38 SF-M8-20 NF-M8 PP-80-TP M8x20mm...

  • Page 39: Pedal Option 2

    Pedal Option 2 NOTE: Hardware to attach pedals to plate not included. Please use hardware included with your pedal set. PART LISTS BOX #: TR80-NEWPB M8x20mm M8x25mm M8x20mm Hex Screw Hex Screw Washer (Lock), M8 Washer (Flat) SH-M8-20 SH-M8-25 WF-M8-20 WL-M8 tooltip tooltip...
  • Page 40 SL-M8-25 NS-M8 WF-M8-20 WL-M8 PP-NP M8x25mm M8x20mm NOTE: Adjust position after pedal and seat installation. SF-M8-16 NS-M8 PP-HR-AL TR-8040-480 TR-8080-480 480mm 480mm M8x16mm...
  • Page 41 SF-M8-25 M8x25mm...

  • Page 42: Pedal Option 3

    Pedal Option 3 NOTE: Hardware to attach pedals to plate not included. Please use hardware included with your pedal set. PART LISTS BOX #: TR80-INVPED3 M6x16mm M8x20mm M8X25mm Hex Screw Washer (Lock), M8 Handle Screw Washer (Flat) SH-M6-16 SL-M8-25 WF-M8-20 WL-M8 tooltip tooltip...
  • Page 43 SH-M8-20 NS-M8 WF-M8-20 WL-M8 NF-M8 PP-IN-FR M8x20mm M8x20mm PP-IN-SM Take note of orientation of PP-IN-SM Brackets. They should slope towards front of the rig WF-M8-20 SH-M8-20 WL-M8 M8x20mm M8x20mm NOTE: Push footrest as farback as Possible to make room for STEP3. NOTE: Keep slightly loos and adjust Position after seat installation.
  • Page 44 SH-M8-20 NS-M8 WF-M8-20 WL-M8 PP-IN-FR M8x20mm M8x20mm tooltip NOTE: Keep slightly loos and adjust Position after seat installation. Take note of orientation of PP-IN-BR Brackets. They should slope towards Front of the ring. SL-M8-25 WF-M8-20 WL-M8 NF-M8 PP-NP-LB M8x25mm M8x20mm tooltip NOTE: Keep slightly loos and adjust Position after seat installation.
  • Page 45 SF-M8-20 NF-M8 PP-80-TP M8x20mm tooltip tooltip...

  • Page 46: Wheel Mount Option

    Wheel Mount Option 1 Fanatec Direct Drive Mount tooltip PART LISTS BOX #: TR80-NWMA tooltip M8x20mm M8x25mm M8X20mm Hex Screw Washer (Lock), M8 Screw (Flat) Washer (Flat) SH-M8-25 WF-M8-20 WL-M8 SF-M8-20 tooltip tooltip tooltip Ball Bearing Nut Ball Bearing Nut, M8 Wheel Mount Side Wheel Mount Plate Wheel Mount Plate 2...
  • Page 47 tooltip SF-M8-20 WM-TR1-PP TR-8120-180 tooltip tooltip 180mm M8x20mm tooltip SF-M8-20 tooltip tooltip M8x20mm tooltip...
  • Page 48 SH-M8-25 Note: Thread screws just WM-TR1-FN tooltip enough to hold WM-TR1- FN in place so screws do M8x25mm tooltip not protrude past WM-TR 1-FN plate. tooltip SH-M8-25 WF-M8-20 WL-M8 NS-M8 tooltip tooltip M8x25mm M6x20mm tooltip tooltip NOTE: Adjust position Attach parts from step after wheelbase and 14 to step 17.
  • Page 49 Note: For Fanatec CSL DD use WM-TR1-FN x 4...

  • Page 50: Wheel Mount Option

    Wheel Mount Option 2 tooltip Universal Direct Drive Mount PART LISTS BOX #: TR80-NWMA tooltip M8x20mm M8x25mm M8X20mm Hex Screw Screw (Flat) Washer (Lock), M8 Washer (Flat) SH-M8-25 SF-M8-20 WF-M8-20 WL-M8 tooltip tooltip tooltip Ball Bearing Nut Ball Bearing Nut, M8 Wheel Mount Side Wheel Mount Plate Wheel Mount Plate 2...
  • Page 51 tooltip SF-M8-20 WM-TR1-PP TR-8120-180 tooltip tooltip 180mm M8x20mm tooltip SF-M8-20 tooltip tooltip M8x20mm tooltip...
  • Page 52 SH-M8-25 Note: Thread screws just WM-TR1-FN tooltip enough to hold WM-TR1- FN in place so screws do M8x25mm tooltip not protrude past WM-TR 1-FN plate. tooltip SH-M8-25 WF-M8-20 WL-M8 NS-M8 tooltip tooltip M8x25mm M6x20mm tooltip tooltip NOTE: Adjust position Attach parts from step after wheelbase and 14 to step 17.
  • Page 53 tooltip SH-M8-20 WM-DD M8x20mm...

  • Page 54: Wheel Mount Option

    Wheel Mount Option 3 tooltip Universal Wheel Deck PART LISTS BOX #: TR80-NWMA tooltip M8x20mm M8x25mm M8X20mm Hex Screw Screw (Flat) Washer (Lock), M8 Washer (Flat) SH-M8-25 SF-M8-20 WF-M8-20 WL-M8 tooltip tooltip tooltip Ball Bearing Nut Ball Bearing Nut, M8 Wheel Mount Side Wheel Mount Plate Wheel Mount Plate 2...
  • Page 55 tooltip SF-M8-20 WM-TR1-PP TR-8120-180 tooltip tooltip 180mm M8x20mm tooltip SF-M8-20 tooltip tooltip M8x20mm tooltip...
  • Page 56 SH-M8-25 Note: Thread screws just WM-TR1-FN tooltip enough to hold WM-TR1- FN in place so screws do M8x25mm tooltip not protrude past WM-TR 1-FN plate. tooltip SH-M8-25 WF-M8-20 WL-M8 NS-M8 tooltip tooltip M8x25mm M6x20mm tooltip tooltip NOTE: Adjust position Attach parts from step after wheelbase and 14 to step 17.
  • Page 57 tooltip SH-M6-15 WM-WM4/5 M6x15mm OPTION 1 OPTION 2 WM-WM4/5 can be installed upside-down for added kneed clearance and lower positioning of wheel base...
  • Page 58 Shifter Option PART LISTS BOX #: TR80-SHIFTER tooltip tooltip M6x15mm M8x20mm Hex Screw Hex Screw Ball Bearing Nut Ball Bearing Nut, M8 Flange Nut, M8 SH-M6-15 SH-M8-20 NS-M8 NF-M8 M8x20mm Washer (Lock), M8 Washer (Flat) Shifter Plate Shifter Plate 2 WF-M8-20 WL-M8 SM-01...
  • Page 59 SH-M8-20 NS-M8 WF-M8-20 WL-M8 BC-40 TR-8080-240 tooltip 240mm M8x20mm M6x20mm SH-M8-20 NS-M8 WF-M8-20 WL-M8 EC-80 BC-40-CAP M8x20mm M6x20mm NF-M8 SM-01 SM-02...
  • Page 60 Shifter Option 2 PART LISTS Bracket Corner Cap BOX #: TR80-SMEX4 BC-40-CAP tooltip tooltip tooltip M8x20mm 200mm Hex Screw Ball Bearing Nut Ball Bearing Nut, M8 Flange Nut, M8 Aluminum Profile SH-M8-20 NS-M8 NF-M8 TR-8080-200 tooltip 580mm Corner Bracket Aluminum Profile Aluminum Profile Cap Shifter Side Plate TR-8080-580...
  • Page 61 SH-M8-20 WF-M8-20 WL-M8 NS-M8 BC-40 TR-8080-200 tooltip 200mm M8x20mm M6x20mm Remove corner bracket to install NS-M8. If removing is inconvenient, refer to P.7 of the main rig assembly guide for the rocking method. SH-M8-20 NS-M8 WF-M8-20 WL-M8 BC-40 TR-8080-580 tooltip 580mm M8x20mm M6x20mm...
  • Page 62 SH-M8-20 WF-M8-20 WL-M8 NS-M8 BP-80-H M8x20mm M6x20mm SH-M8-20 WF-M8-20 WL-M8 NF-M8 SM-01 SM-02 M8x20mm M6x20mm NS-M8 EC-80 BC-40-CAP...
  • Page 63 FINISHED Share your build online and tag us to be featured! @trakracer @trakracer @trak_racer...

Table of Contents