© 2025 Medi-Rent Pty Limited
Medi-Rent Pty Limited
ABN: 37 603 454 360
info@medirent.com.au
AU PH: 1300 726 666
HEAD OFFICE:
Unit 1, 61 Beauchamp Rd
Matraville NSW 2036
Unit 3, 93 Riverside Avenue
Werribee VIC 3030
Unit 3,8 Emplacement Crescent
Hamilton Hill WA 6163
NZ PH: 0800 725 555
9F Lady Ruby Drive
East Tamaki
Auckland 2013
NEW ZEALAND
www.medirent.com.au
www.medirent.co.nz
Cryon-x pro Quick Set-up Guide: knee
This guide is intended as a quick reference once the user manual has been read in-full
3
The CRYON-X can run on battery or plugged into power. The device can be used whilst it is
plugged in and charging.
If connecting to power- Plug the lead in to the wall and the device, ensure the lead is not a
trip hazard.
5
Lay the garment flat under your knee ensuring the tubing is not kinked or twisted.
Wrap the garment around your knee. Use the adhesive strip to hold the garment in place.
1
2
Place the device somewhere easily
FIRST TIME USE:
accessible, e.g. a side table. Leave at least
Use bottled water provided. Unscrew the
30cm clearance around the device for
water tank lid and fill the tank to near the
unrestricted air flow.
brim. Keep the water bottle nearby in case
the device prompts for more water once
running.
OVERFILLING CAN LEAD TO SPILLAGE!
4
Connect hosing to device only, making sure
you hear a click when connecting.
6
Connect hosing to the garment, making
sure you hear a click when connecting.
Need help?
Do you have a question about the Cryon-x pro and is the answer not in the manual?
Questions and answers