MEDI RENT LX9 Quick Setup Manual

© 2020 Medi-Rent Pty Limited
Medi-Rent Pty Limited
ABN: 37 603 454 360
info@medirent.com.au
AU PH: 1300 726 666
HEAD OFFICE:
Unit 3, 61 Beachamp Rd
Matraville NSW 2036
Unit 3, 93 Riverside Avenue
Werribee VIC 3030
AUSTRALIA
F: 02 9316 9998
NZ PH: 0800 725 555
18/80 Queen Street
Auckland CBD 1010
NEW ZEALAND
www.medirent.com.au
www.medirent.co.nz

LX9 Quick Set-up Guide: Leg

This guide is intended as a quick reference once the user manual has been read in-full
1
Place the device somewhere easily
accessible. You may wear non-bulky clothes
under the LX9 sleeve.
3 4
Connect cuff hose to the device and the
Position your body on a bed or couch where
smaller end of the hose to the cuff.
yourleg/s is/are elevated and supported.
6 7
Fasten cuff zip and Velcro tabs.
If you have an adjustable garment with an
extension zipper: Add the extension zipper/s
before putting the garment on.
Overlapping garments cannot be widened in
this method.
2
Plug your power lead in, ensuring it is not a
trip hazard. (Often you will need to visit the
bathroom during treatment due to the fluid
extraction).
5
Place your leg into the sleeve by unzipping it
part-way.
8
Turn the controller on by pressing "Power".