MEDI RENT CTC-7 Quick Setup Manual

© 2023 Medi-Rent Pty Limited
Medi-Rent Pty Limited
ABN: 37 603 454 360
info@medirent.com.au
AU PH: 1300 726 666
HEAD OFFICE:
Unit 1, 61 Beauchamp Rd
Matraville NSW 2036
Unit 3, 93 Riverside Avenue
Werribee VIC 3030
Unit 3,8 Emplacement Crescent
Hamilton Hill WA 6163
NZ PH: 0800 725 555
9F Lady Ruby Drive
East Tamaki
Auckland 2013
NEW ZEALAND
www.medirent.com.au
www.medirent.co.nz
CTC-7 Quick Set-up Guide: knee
This guide is intended as a quick reference once the user manual has been read in-full
1
Place the device somewhere easily
accessible, ideally on the same level as the
garment e.g. a side table. Leave at least
30cm clearance around the device for
unrestricted air flow.
3
Plug the power lead in to both the wall and
device, ensuring it is not a trip hazard.
5
Lay the garment flat under your knee ensuring the tubing is not kinked or twisted.
Wrap the garment around your knee. Use the adhesive strips to hold the garment in place.
Additional strips can be used to increase firmness of the garment.
2

FIRST TIME USE:

Use bottled water provided.
Unscrew the water tank lid and fill the tank
to MAX.
Approx. 30 secs after you press the play
button the garment will fill with water.
Top up the tank whilst the device is running.
Approx. 450mL.
OVERFILLING CAN LEAD TO SPILLAGE!
4
Connect air and water hosing to device
only, making sure you hear a click when
connecting.
6
Connect air and water hosing to the
garment, making sure you hear a click when
connecting.