Do you have a question about the PS1300 and is the answer not in the manual?
Questions and answers
Martin David Razey
June 30, 2025
how do i revive an old p1300 haven't used it for 2 years it might have gone into safe mode, is there a way to bring it back to life, charging does not seem to work, display lights up for a couple of seconds when plug is just in then disappears
PRODUCT OVERVIEW XT60 to 50A Anderson AC Charger Car Charger User Manual Cable Storage MAIN POWER CONTROL AIR INTAKE/OUTLET LIGHT CONTROL AC 240V OUTPUT BUTTON USB CONTROL XT-60 INPUT PORT DC CONTROL AC 240V INPUT PORT LCD DISPLAY OVERLOAD PROTECTION...
BUTTON FUNCTIONS POWER CONTROL BUTTON: This is the master power button, a long press to turn on and a long press to turn off the unit (hold the button until the screen turns on/off). When not in use, please turn the unit off. USB CONTROL BUTTON: Make sure the power station is on before pressing the USB control button.
AIR INTAKE/OUTLET (BUILT-IN COOLING FAN): The PS1300 utilises an internal cooling fan to ensure it operates within the appropriate temperature range. When the PS1300 experiences a high output/input load, it automatically turns on the fan. The fan may turn on intermittently to keep the internal temperatures within the operating range.
Use the included wall socket to get 700W fast charging, which can fully charge the PS1300 from 0 to 100% in 2.5 hours. The PS1300 should be charged directly by the wall socket, please do not use extension cords. Do not use the same socket to connect other devices to when charging the PS1300.
LCD FEATURES: REMAINING DISCHARGE TIME AC OUTPUT STATUS FAN STATUS USB-C OUTPUT STATUS HIGH/LOW TEMPERATURE USB OUTPUT STATUS BATTERY LEVEL INDICATOR AC CHARGING STATUS TOTAL INPUT POWER XT60 INPUT STATUS TOTAL OUTPUT POWER DC OUTPUT STATUS LED LIGHT STATUS CIGARETTE LIGHTER OUTPUT STATUS...
Charging unavailable UPS MODE The PS1300 has a bypass function, which means power will not pass through the battery; it will be taken directly from the AC output. In this mode, the power source is the power grid, when there is an emergency power outage, the power source will switch to the battery within 1Oms and protect the connected appliance.
UPS CONNECTIONS: As shown in the figure below, connect the PS1300 between the wall socket and the electrical appliances, ensuring the power of the PS1300 is ON. When you turn on the electrical appliances, power will be taken directly from the grid.
SOLAR PANEL CHARGING: Do not charge the PS1300 via a solar panel that has a voltage exceeding 50V. Supports 500W max solar input (solar panels not included), the charging time depends on the solar panel input. To ensure proper operation, please verify that there is no regulator in the line.
As a result, charging times may be extended. If you require a quicker charge, it is recommended to use the AC adapter that came with the device. The AC adapter provides higher power output and is better suited for fast charging. PS1300 Car Charging Cable (Included)
Battery pack rated capacity 1248Wh SAFETY PRECAUTIONS For safe operation and optimal performance, the PS1300 Portable Power Station must be operated correctly. Please carefully read, under stand, and follow all instructions and guidelines in this user guide. Failure to follow these instructions may result in damage to the unit, property, death, or serious injury.
EXPLOSION HAZARD: Do not use the power station in an environment where flammable fumes or gases are present (such as gas bottles, petrol engines, or lead-acid battery compartments). WARNING: Avoid using the power station in extreme temperatures, high humidity, direct sunlight, and near fire.
When it comes to energy storage and creation at iTechworld, we take pride in being one of the biggest names in the industry. Based in Australia, we are a family-owned and operated business. With many more innovative products on the horizon we are committed to constantly raising the bar to provide bigger and better benefi ts to all our customers Australia-wide.
Need help?
Do you have a question about the PS1300 and is the answer not in the manual?
Questions and answers
how do i revive an old p1300 haven't used it for 2 years it might have gone into safe mode, is there a way to bring it back to life, charging does not seem to work, display lights up for a couple of seconds when plug is just in then disappears