Display And Indicators; Storing And Recalling Channels - Pioneer DEH-P9400MP Operation Manual

XM Tuner
The following explains how to use this product
to control a XM tuner (e.g., GEX-P900XM),
which is sold separately. For details of XM
tuner-specific operation/features, see your XM
tuner's manual.
D
isplay and indicators
FORM 1
q
e r
FORM 2
q
qBand
wPreset number
eChannel number
rXM tuner information
tChannel select mode indicator
35
w
t
w e t
r
B
asic operation
1. Press SOURCE to select the XM tuner.
Press SOURCE until "XM" appears.
2. Press VOLUME to extend the VOLUME
outward.
• When you press VOLUME, it extends out-
ward so that it becomes easier to turn. To
retract VOLUME, press it again.
3. Turn VOLUME to adjust the volume.
4. Press 2 2 or 3 3 to select a channel.
The channels move up or down step by
step.
• If you press and hold 2 or 3, you can
increase or decrease channel number by
10 when the channel number select mode
has been selected.
S
toring and recalling channels
Storing channels
1. Press NEXT to display "1" – "6".
Press NEXT until "1" – "6" appears.
2. When you find a channel that you want to
store in memory, press and hold any of
the buttons 1 – 6 until the preset number
stops flashing.
The channel is stored in memory under the
selected button.
Recalling channels
1. Press NEXT to display "1" – "6".
Press NEXT until "1" – "6" appears.
2. Press any of the buttons 1 – 6 to recall
the channel preset under that button.
Note:
• You can also use 5 or ∞ to recall channels memo-
rized under the buttons 1 – 6, when the channel
number select mode has been selected.